Difference between revisions of "CffDisplay"
(Created page with "==Overview== The CFF display is a project where a system drives 2 old clock displays for hours and minutes, which are found @Fixme's lab. The displays are composed each by a...") |
(→Overview) |
||
Line 10: | Line 10: | ||
*[Pictures] will probably never come ;-) | *[Pictures] will probably never come ;-) | ||
− | ===Raspberry Pi | + | ===Raspberry Pi=== |
*[schematic of the connections] | *[schematic of the connections] | ||
*[Source code in python] | *[Source code in python] | ||
*[Pictures] | *[Pictures] |
Revision as of 10:57, 17 November 2015
Overview
The CFF display is a project where a system drives 2 old clock displays for hours and minutes, which are found @Fixme's lab. The displays are composed each by a dual coils step by step 12V motor (I = 170 mA). This means first to build 2 double H bridge optocoupled slaves boards. The slave's board is wanted to be a home made exercise, even if everything exist already on the electronic's market. I decided to drive these slave's boards with a Raspberry Pi B+ master board via USB. The master sends the desired position to the slaves (hours : 1 - 12, minutes : 1 - 59). The Raspi's date is often updated by NTP, the system's source code is writen in python. The signals for the motors are generated inside the slave's board by a PIC16F627A. The PIC16F627A has its own internal master clock of 4 Mhz. The source code inside the PIC is writen in C with the old Microchip MPLab IDE, compiled by the free CC5X compiler and flashed with the ICD2 in the PIC via ICSP.
Double H bridge board
- [Schematic] comes very soon!
- [PCB] comes soon!
- [Source code in C of the PIC16F627A] comes later.
- [Pictures] will probably never come ;-)
Raspberry Pi
- [schematic of the connections]
- [Source code in python]
- [Pictures]