Changes
== Software ==
* A RaspberryPi The printer is controller with any PC attached to our Printrbot with [https://githubUSB and using the Cura software.com/guysoft/OctoPi OctoPi operating system] (custom Raspbian)* [http://octoprint.org/ OctoPrint] is accessible on port 80 locally on http://octopi.local/ to control Use the Simple* A webcam is attached by USB lateste Cura and will usually be recognized by Motion and available on http://octopi.local:8081 for streaming/image capturethe "Printrbot simple 2014 maker edition" profile (see param)
== Slicing with Cura parameters ==* You can't slice on Octoprint, it has been deactivated because it's too slow and you can't crontrol settings* Slice on your own PC with [http://software.ultimaker.com/ Cura] and the following parameters
[[Image:simple1.png|x200px]]
[[Image:simple2.png|x200px]]
