Difference between revisions of "3d printer"
From Fixme.ch
(→New parts) |
|||
| Line 51: | Line 51: | ||
* If a pile of plastic has formed in the extruder, remove the wire complitely and cut it | * If a pile of plastic has formed in the extruder, remove the wire complitely and cut it | ||
* Put the leftover in the box, maybe one day we'll be able to recycle it! | * Put the leftover in the box, maybe one day we'll be able to recycle it! | ||
| + | |||
| + | == Issues to fix == | ||
| + | * End stops are getting crapy | ||
| + | * Belt tension is bad | ||
| + | * Y alignement problems | ||
| + | * Fan can't be turned off (electrical problem?) | ||
| + | * <s>http://wiki.ultimaker.com/Jamming</s> | ||
| + | * <s>Needs a new tube and fixation</s> | ||
| + | * <s>One of the nozzle is loose. When the extrusion begins, the pipe move</s> | ||
| + | ** <s>[[Media:ultimaker-fix1.png|Nemen has printed a piece for fixin']]</s> | ||
| + | ** <s>http://www.thingiverse.com/thing:27376</s> | ||
| + | * <s>Belt tension: https://www.youtube.com/watch?v=grHmmmSoOfc&</s> | ||
| + | * <s>Thermocoupler and the heater are stuck in the head</s> | ||
== Todo == | == Todo == | ||
| Line 81: | Line 94: | ||
</gallery> | </gallery> | ||
| − | + | == New parts == | |
| − | + | ||
* Ordered and installed May 2013 | * Ordered and installed May 2013 | ||
* Advices from FabLab Munchen: https://plus.google.com/u/0/118147898615631299121/posts/Kckxn1ssgUt | * Advices from FabLab Munchen: https://plus.google.com/u/0/118147898615631299121/posts/Kckxn1ssgUt | ||
| Line 90: | Line 102: | ||
* Self-printer alternatives | * Self-printer alternatives | ||
** http://www.thingiverse.com/thing:26094 Extruder upgrade | ** http://www.thingiverse.com/thing:26094 Extruder upgrade | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Other resources == | == Other resources == | ||
* http://www.kickstarter.com/projects/rocknail/filabot-plastic-filament-maker | * http://www.kickstarter.com/projects/rocknail/filabot-plastic-filament-maker | ||
* [http://www.metaingegneria.com/scanner-laser-3d/ 3D scanner with Camera + Laser + MatLab + MeshLab] | * [http://www.metaingegneria.com/scanner-laser-3d/ 3D scanner with Camera + Laser + MatLab + MeshLab] | ||
Revision as of 03:25, 25 May 2013
Contents
Information
- http://wiki.ultimaker.com/Newcomer_guide_to_your_first_3D_print
- 3D Software:
- OpenSCAD is a script-based 3D editor. it can make use of parameters, conditions, for and while loops, etc... This is currently Petaflot's choice
- http://www.3dtin.com/ Online in the browser
- http://www.netfabb.com/download.php (Linux version)
- Sketchup (old version works with wine) with su2stl plugin
- Printing software:
- https://print.fixme.ch web interface to replace Printrun/Cura (still need Slic3r to create the gcode)
- Slic3r and Printrun
- Cura
- To check, http://projectsilkworm.com/
- Check STL files for printability: http://cloud.netfabb.com/
- Buy material in switzerland: Resources#3D_Printer
Cura for printing
Installation
- http://daid.github.com/Cura/
- it's the only software worth it
- Yes, you will need PyOpenGL for it to run. Displaying nice 3d images is not that trivial.
- Recommended: Use the dev version on github: https://github.com/daid/Cura.git (12.10 when I'm writing)
- Required packages: wxPython and PyOpenGL.
- You can use a python virtualenv.
First use
- On first Cura start, you don't need to upgrade to Marlin firmware because it's already done.
- You should run the checks, at least to check if USB connection between PC and the printer is working. For temperature check, the printer need to cool down (to ~30) before heating and check, it can take looong time.
- Now you can use Cura to print objects.
Printing
- Load a .stl model.
- Change orientation, size, etc...
- Click on the Prepare print button.
- Software will slice the object into GCode. The more you choose a large scale object, the longer the execution time is.
- When it done, click on Print button to open the Printing dialog.
- Wait the software connect with the printer, Connection button will turn from clickable to readonly and Print button will turn from readonly to clickable.
- Set the temperature with the arrows (yeah it's not working by putting the number directly)
- Wait a bit so the hot end is distributively warmed
- Extrude before printing, so the wire is at the start of the hot end
- Make sure the wire is extruding correctly (the output wire is regular)
- Click the Print button.
Important points
- KEEP YOUR EYES ON THE PRINTER THROUGHOUT THE PRINTING PROCESS!!! And clean which could interfere the printing.
- BE carefull with the end stops, if they don't work, turn OFF the printer immediatly and fix them (by bending the metal part a little bit for instance)
After printing
- If a pile of plastic has formed in the extruder, remove the wire complitely and cut it
- Put the leftover in the box, maybe one day we'll be able to recycle it!
Issues to fix
- End stops are getting crapy
- Belt tension is bad
- Y alignement problems
- Fan can't be turned off (electrical problem?)
-
http://wiki.ultimaker.com/Jamming -
Needs a new tube and fixation -
One of the nozzle is loose. When the extrusion begins, the pipe move -
Belt tension: https://www.youtube.com/watch?v=grHmmmSoOfc& -
Thermocoupler and the heater are stuck in the head
Todo
Stuff to print
Files
- FIXME keychain: File:Fixme-key.stl
- Tablet support: File:Tablet-support.stl
- Pincette: File:Pincette-led.stl File:Pincette-piles.stl
Photos
Ultimaker 3D printer
Raspberry Pi case
Cells Ball
8bit Heart
Companion Cube (Portal)
Pickaxe
Keychain
Keychain 2
Metric bolts
Pincette aimantée
Creepers
Chaine
New parts
- Ordered and installed May 2013
- Advices from FabLab Munchen: https://plus.google.com/u/0/118147898615631299121/posts/Kckxn1ssgUt
- Self-printer alternatives
- http://www.thingiverse.com/thing:26094 Extruder upgrade
