Difference between revisions of "3d printer"

From Fixme.ch
Jump to: navigation, search
(→‎Finance)
(→‎Information)
Line 10: Line 10:
 
* Printing software:
 
* Printing software:
 
** https://print.fixme.ch web interface to replace Printrun/Cura (still need Slic3r to create the gcode)
 
** https://print.fixme.ch web interface to replace Printrun/Cura (still need Slic3r to create the gcode)
 +
*** Currently not connected to the printer
 +
*** Used for the webcam: http://62.220.135.248:8081/stream.mjpg
 
** [http://slic3r.org/ Slic3r] and [http://reprap.org/wiki/Printrun Printrun]  
 
** [http://slic3r.org/ Slic3r] and [http://reprap.org/wiki/Printrun Printrun]  
 
** [https://github.com/daid/Cura Cura]
 
** [https://github.com/daid/Cura Cura]

Revision as of 18:24, 3 June 2013

Ultimaker.png

Information

Cura for printing

Installation

  • http://daid.github.com/Cura/
  • it's the only software worth it
  • Yes, you will need PyOpenGL for it to run. Displaying nice 3d images is not that trivial.
  • Recommended: Use the dev version on github: https://github.com/daid/Cura.git (12.10 when I'm writing)
  • Required packages: wxPython and PyOpenGL.
  • You can use a python virtualenv.

First use

  • On first Cura start, you don't need to upgrade to Marlin firmware because it's already done.
  • You should run the checks, at least to check if USB connection between PC and the printer is working. For temperature check, the printer need to cool down (to ~30) before heating and check, it can take looong time.
  • Now you can use Cura to print objects.

Printing

  • Load a .stl model.
  • Change orientation, size, etc...
  • Click on the Prepare print button.
  • Software will slice the object into GCode. The more you choose a large scale object, the longer the execution time is.
  • When it done, click on Print button to open the Printing dialog.
  • Wait the software connect with the printer, Connection button will turn from clickable to readonly and Print button will turn from readonly to clickable.
  • Set the temperature with the arrows (yeah it's not working by putting the number directly)
  • Wait a bit so the hot end is distributively warmed
  • Extrude before printing, so the wire is at the start of the hot end
  • Make sure the wire is extruding correctly (the output wire is regular)
  • Click the Print button.

Setting

  • PLA: ~230° (orange one)
  • ABS: 250° with fan ON (black one)

Important points

  • KEEP YOUR EYES ON THE PRINTER THROUGHOUT THE PRINTING PROCESS!!! And clean what could interfere with the printing.
  • BE carefull with the end stops, if they don't work, turn OFF the printer immediatly and fix them (by bending the metal part a little bit for instance)

After printing

  • If a pile of plastic has formed in the extruder, remove the wire complitely and cut it
  • Put the leftover in the box, maybe one day we'll be able to recycle it!

Finance

  • To buy new PLA filament and upgrade parts, there's a piggy bank next to the printer
  • The cost in filament is indicated by Cura, just take a guess to add general maintenance cost of the printer

Piggy.png

Issues to fix

Todo

Stuff to print

Files

Photos

  • Ultimaker 3D printer

  • 2012-11-04 20.39.49.jpg
  • Ulti1.png
  • Ulti2.png

  • Raspberry Pi case

  • Cells Ball

  • 8bit Heart

  • Companion Cube (Portal)

  • Pickaxe

  • Keychain

  • Keychain 2

  • Metric bolts

  • Pincette aimantée

  • Creepers

  • Chaine

New parts

Other resources

Retrieved from "http://fixme.ch/w/index.php?title=3d_printer&oldid=4401"