Difference between revisions of "Plastic recycling"
From Fixme.ch
m (→Parts needed) |
(→Parts needed) |
||
| Line 27: | Line 27: | ||
|- | |- | ||
| Tube | | Tube | ||
| − | | Part where the material will flow trough. | + | | Part where the material will flow trough. Which material should we use ? (Aluminium/ (Stainless) steel / |
| − | | Needed | + | | Needed (20mm internal diameter /) |
|- | |- | ||
| − | | | + | | Auger |
| Screw pushing the material | | Screw pushing the material | ||
| Just bought [http://www.ebay.com/itm/20mm-Long-Combination-Wood-Auger-Drill-Bit-Carpenter/310775630556 one of those] on Ebay | | Just bought [http://www.ebay.com/itm/20mm-Long-Combination-Wood-Auger-Drill-Bit-Carpenter/310775630556 one of those] on Ebay | ||
| Line 39: | Line 39: | ||
|- | |- | ||
| Heating element | | Heating element | ||
| − | | Nichrome wire ? Ceramic heaters ? | + | | Nichrome wire ? Ceramic heaters ? Quite cheap on ebay |
| + | | Needed | ||
| + | |- | ||
| + | | Thermometers | ||
| + | | Get the internal temperature in different places of the tube (rear, middle and nose for example). | ||
| Needed | | Needed | ||
|- | |- | ||
| Extrusion nozzle | | Extrusion nozzle | ||
| − | | Transforms the heated plastic into a | + | | Transforms the heated plastic into a regular filament suitable for the printer. |
| Needed | | Needed | ||
|- | |- | ||
Revision as of 15:16, 12 November 2013
Description
Build an extruder to recycle and create new filament cheaply for Fixme's Ultimaker and other people's printers. An extruder is constructed from essentially two parts: a feeding mechanism, and a heater - chopped plastic is fed from a container into the feeding mechanism, which then pushes the plastic slowly through the heater to create the filament.
Contents
Goal
- Recycle failed/old prints and extruded plastic
- Recycle other plastics, such as PET bottles (caps), etc
- Experiment with new colors and materials
Obstacles
- Get a filament of repeatable thickness
- More complex = more difficult
- Ventilation preferable for ABS
Parts needed
| Part Name | Description | State |
|---|---|---|
| Tube | Part where the material will flow trough. Which material should we use ? (Aluminium/ (Stainless) steel / | Needed (20mm internal diameter /) |
| Auger | Screw pushing the material | Just bought one of those on Ebay |
| Motor | Makes stuff move | Needed |
| Heating element | Nichrome wire ? Ceramic heaters ? Quite cheap on ebay | Needed |
| Thermometers | Get the internal temperature in different places of the tube (rear, middle and nose for example). | Needed |
| Extrusion nozzle | Transforms the heated plastic into a regular filament suitable for the printer. | Needed |
| Cooling system | "From liquid to solid in a trice !". Air/water/oil ? | Needed |
Resources
Extruders
I'm guessing we should build something in between - not too simple but not too expensive either.
Misc
- Color filament
- Filament recycling detailed research paper (noskill)
- Broyeuse extrudeuse domestique (noskill)
Schedule
Why do we even have this section?
