Open main menu
Last modified on 27 February 2015, at 22:57

File:Laser cutting rpi case.jpg

Revision as of 22:57, 27 February 2015 by Sasha (Talk | contribs) (Using the laser cutter to cut out a cardboard Raspberry Pi case)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Original file ‎(4,128 × 2,322 pixels, file size: 2.5 MB, MIME type: image/jpeg)

Using the laser cutter to cut out a cardboard Raspberry Pi case

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current22:57, 27 February 2015Thumbnail for version as of 22:57, 27 February 20154,128 × 2,322 (2.5 MB)Sasha (Talk | contribs)Using the laser cutter to cut out a cardboard Raspberry Pi case
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera model GT-I9505
Camera manufacturer SAMSUNG
Date and time of data generation 17:26, 13 February 2015
Exposure time 1/33 sec (0.03030303030303)
ISO speed rating 100
F Number f/2.2
Lens focal length 4.2 mm
Orientation Normal
Width 4,128 px
File change date and time 17:26, 13 February 2015
Height 2,322 px
Y and C positioning Centered
Vertical resolution 72 dpi
Horizontal resolution 72 dpi
Date and time of digitizing 17:26, 13 February 2015
Exif version 2.2
Unique image ID O13F0SAGH01
Sensing method One-chip color area sensor
Exposure Program Normal program
APEX aperture 2.28
APEX brightness 2.31640625
APEX shutter speed 5.0592193603516
Color space sRGB
Metering mode Center weighted average
APEX exposure bias 0
Maximum land aperture 2.28 APEX (f/2.2)
Focal length in 35 mm film 31 mm
Light source Unknown
Scene capture type Standard
Flash Flash did not fire
White balance Auto white balance
Exposure mode Auto exposure