[[Category:Ongoing_Projects]]
The "Gyrophare" (''warning light'', in french) is an IoT device located in the middle of the hackerspace (at least when this page was written).
You can control the Gyrophare via HTTP by calling a <code>GET</code> on '''/on''' and on '''/off'''.
It's Its current IP address is static (hardcoded in the WeMos) and is <code>62.220.135.210</code>.Its URL is: <code>gyro.fixme.ch</code>.
For example:
curl http://gyro.fixme.ch/on
curl http://gyro.fixme.ch/off
curl http://62.220.135.210/on
curl http://62.220.135.210/off
Note that both request (also <code>GET http://62.220.135.210/</code>) are answered with a <code>OK</code>.
{{warning|Sending to much request will make it freeze and note respond to your any againstop responding, making it impossible to turn ofoff. Do not do it.}}
= Hardware =
{{warning|Be careful: there is high voltage (230V) in this hack. It's pretty well isolated, except for the relay screws, but unplug the system if you want to look at it.}}
= Software =
The code is here: https://git.fixme.ch/BinaryBrain/Gyrophare
= Authors =
[[User:Binary_Brain]]