Changes
/* Calibration */
* Bed screws are now locked using some of those screw glue, so it should stay calibrated longer
* Z end stop is glued, it was moving, Z axis should stay calibrated longer
* There is a mechanical problem on the Y axis, to be calibrated the bed is not leveled compared to the ground, it's working though == Testing ==Interesting stuff to print for testing the quality and calibration * http://www.3dbenchy.com/* 5mm steps https://www.thingiverse.com/thing:24238* Single wall (0.4mm) https://www.thingiverse.com/thing:271086* Overhang, bridges, holes and a lot of tests https://www.thingiverse.com/thing:1363023
== See Also ==
* [[Ultimaker]]
* [[Plastic_recycling]]
