PrintrbotSimple

Information

• Shop: http://printrbot.com/shop/printrbot-simple/
• How-To: http://help.printrbot.com/c/2014_Printrbot_simple
• Calibrate: http://3.dmake.me/blog/2014/calibrate-3d-printer/
• It uses 1.75mm filament
• Print area is 100mm x 100mm x 100mm

Software

• The printer is controller with any PC attached to USB and using the Cura software.
• Use the lateste Cura and the "Printrbot simple 2014 maker edition" profile (see param)

Cura parameters

Running

• Check the Z level (going at the axe home), the head must slightly touch the bed and not pressing on it
• Check the filament freedom, as the simple doesn't have a spool holder
• Check X and Y rope tension
• Do not aliment the raspberry pi from a PC

See Also

• Ultimaker
• Plastic_recycling