https://fixme.ch/w/api.php?action=feedcontributions&feedformat=atom&user=Maurice809
Fixme.ch - User contributions [en]
2026-04-05T08:31:24Z
User contributions
MediaWiki 1.25.1
https://fixme.ch/w/index.php?title=SDR&diff=13355
SDR
2017-04-23T11:30:36Z
<p>Maurice809: /* Installation */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git libusb-1.0-0-dev cmake build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
=== Calibration ===<br />
Pour utiliser la grande partie des logiciel SDR il faut faire une calibration<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libtool autoconf automake libfftw3-dev<br />
</pre><br />
==== Installation ====<br />
<pre><br />
git clone https://github.com/steve-m/kalibrate-rtl.git<br />
cd kalibrate-rtl/<br />
./bootstrap<br />
./configure<br />
make<br />
sudo make install<br />
</pre><br />
<br />
==== Usage ====<br />
On utilise les fréquences du GSM-900 <br />
<pre><br />
# kal -e 22 -s 900<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Scanning for GSM-900 base stations.<br />
GSM-900:<br />
chan: 9 (936.8MHz + 22.294kHz) power: 52744.70<br />
chan: 11 (937.2MHz + 22.198kHz) power: 148897.40<br />
chan: 48 (944.6MHz + 21.298kHz) power: 64839.80<br />
chan: 50 (945.0MHz + 21.360kHz) power: 76421.47<br />
chan: 66 (948.2MHz + 21.020kHz) power: 100342.53<br />
chan: 68 (948.6MHz + 21.109kHz) power: 148650.05<br />
chan: 74 (949.8MHz + 21.369kHz) power: 57399.97<br />
<br />
# kal -e 22 -c 80 -v<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Calculating clock frequency offset.<br />
<br />
<br />
<br />
</pre><br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev libasound2-dev<br />
</pre><br />
<br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=Lora&diff=13308
Lora
2017-04-12T19:09:17Z
<p>Maurice809: LoraWan LPN low power network</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Description ==<br />
* Créer un tuto pour mettre en œuvre le réseau LoraWan <br />
<br />
== Goal ==<br />
* Créer une passerelle IoT - Internet <br />
* Réaliser un dialogue entre deux objets<br />
<br />
== Obstacles ==<br />
Beaucoup de documentation sont rédiger en anglais<br />
<br />
<br />
== Component ==<br />
* Feather32u4 RFM95W LoRa Radio 900MHz http://adafru.it/3078<br />
<br />
<br />
<br />
== Participants ==<br />
* [[User:Maurice809]] (Leader)</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13305
SDR
2017-04-10T19:10:30Z
<p>Maurice809: /* Installation */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git libusb-1.0-0-dev cmake build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
=== Calibration ===<br />
Pour utiliser la grande partie des logiciel SDR il faut faire une calibration<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libtool autoconf automake libfftw3-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/steve-m/kalibrate-rtl.git<br />
cd kalibrate-rtl/<br />
./bootstrap<br />
./configure<br />
make<br />
sudo make install<br />
</pre><br />
<br />
==== Usage ====<br />
On utilise les fréquences du GSM-900 <br />
<pre><br />
# kal -e 22 -s 900<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Scanning for GSM-900 base stations.<br />
GSM-900:<br />
chan: 9 (936.8MHz + 22.294kHz) power: 52744.70<br />
chan: 11 (937.2MHz + 22.198kHz) power: 148897.40<br />
chan: 48 (944.6MHz + 21.298kHz) power: 64839.80<br />
chan: 50 (945.0MHz + 21.360kHz) power: 76421.47<br />
chan: 66 (948.2MHz + 21.020kHz) power: 100342.53<br />
chan: 68 (948.6MHz + 21.109kHz) power: 148650.05<br />
chan: 74 (949.8MHz + 21.369kHz) power: 57399.97<br />
<br />
# kal -e 22 -c 80 -v<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Calculating clock frequency offset.<br />
<br />
<br />
<br />
</pre><br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev libasound2-dev<br />
</pre><br />
<br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13304
SDR
2017-04-10T18:53:21Z
<p>Maurice809: /* Requirement */Simplification de l'insatallation</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git libusb-1.0-0-dev cmake build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
=== Calibration ===<br />
Pour utiliser la grande partie des logiciel SDR il faut faire une calibration<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libtool autoconf automake libfftw3-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/steve-m/kalibrate-rtl.git<br />
cd kalibrate-rtl/<br />
./bootstrap<br />
.configure<br />
make<br />
sudo make install<br />
</pre><br />
==== Usage ====<br />
On utilise les fréquences du GSM-900 <br />
<pre><br />
# kal -e 22 -s 900<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Scanning for GSM-900 base stations.<br />
GSM-900:<br />
chan: 9 (936.8MHz + 22.294kHz) power: 52744.70<br />
chan: 11 (937.2MHz + 22.198kHz) power: 148897.40<br />
chan: 48 (944.6MHz + 21.298kHz) power: 64839.80<br />
chan: 50 (945.0MHz + 21.360kHz) power: 76421.47<br />
chan: 66 (948.2MHz + 21.020kHz) power: 100342.53<br />
chan: 68 (948.6MHz + 21.109kHz) power: 148650.05<br />
chan: 74 (949.8MHz + 21.369kHz) power: 57399.97<br />
<br />
# kal -e 22 -c 80 -v<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Calculating clock frequency offset.<br />
<br />
<br />
<br />
</pre><br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev libasound2-dev<br />
</pre><br />
<br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13303
SDR
2017-04-10T18:51:11Z
<p>Maurice809: /* Requirement */Simplification de la commande d'installation</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git libusb-1.0-0-dev cmake build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
=== Calibration ===<br />
Pour utiliser la grande partie des logiciel SDR il faut faire une calibration<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libtool autoconf automake libfftw3-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/steve-m/kalibrate-rtl.git<br />
cd kalibrate-rtl/<br />
./bootstrap<br />
.configure<br />
make<br />
sudo make install<br />
</pre><br />
==== Usage ====<br />
On utilise les fréquences du GSM-900 <br />
<pre><br />
# kal -e 22 -s 900<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Scanning for GSM-900 base stations.<br />
GSM-900:<br />
chan: 9 (936.8MHz + 22.294kHz) power: 52744.70<br />
chan: 11 (937.2MHz + 22.198kHz) power: 148897.40<br />
chan: 48 (944.6MHz + 21.298kHz) power: 64839.80<br />
chan: 50 (945.0MHz + 21.360kHz) power: 76421.47<br />
chan: 66 (948.2MHz + 21.020kHz) power: 100342.53<br />
chan: 68 (948.6MHz + 21.109kHz) power: 148650.05<br />
chan: 74 (949.8MHz + 21.369kHz) power: 57399.97<br />
<br />
# kal -e 22 -c 80 -v<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Calculating clock frequency offset.<br />
<br />
<br />
<br />
</pre><br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13302
SDR
2017-04-07T18:36:18Z
<p>Maurice809: </p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
=== Calibration ===<br />
Pour utiliser la grande partie des logiciel SDR il faut faire une calibration<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libtool autoconf automake libfftw3-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/steve-m/kalibrate-rtl.git<br />
cd kalibrate-rtl/<br />
./bootstrap<br />
.configure<br />
make<br />
sudo make install<br />
</pre><br />
==== Usage ====<br />
On utilise les fréquences du GSM-900 <br />
<pre><br />
# kal -e 22 -s 900<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Scanning for GSM-900 base stations.<br />
GSM-900:<br />
chan: 9 (936.8MHz + 22.294kHz) power: 52744.70<br />
chan: 11 (937.2MHz + 22.198kHz) power: 148897.40<br />
chan: 48 (944.6MHz + 21.298kHz) power: 64839.80<br />
chan: 50 (945.0MHz + 21.360kHz) power: 76421.47<br />
chan: 66 (948.2MHz + 21.020kHz) power: 100342.53<br />
chan: 68 (948.6MHz + 21.109kHz) power: 148650.05<br />
chan: 74 (949.8MHz + 21.369kHz) power: 57399.97<br />
<br />
# kal -e 22 -c 80 -v<br />
Found 1 device(s):<br />
0: Generic RTL2832U OEM<br />
<br />
Using device 0: Generic RTL2832U OEM<br />
Found Rafael Micro R820T tuner<br />
Exact sample rate is: 270833.002142 Hz<br />
kal: Calculating clock frequency offset.<br />
<br />
<br />
<br />
</pre><br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13301
SDR
2017-04-07T18:06:50Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -l message-acars.txt -r 0 131.525 131.550 131.725 131.825 &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=User:Maurice809&diff=13172
User:Maurice809
2017-02-21T20:20:25Z
<p>Maurice809: Created page with "Maurice809 Je suis passionné d'informatique et de radio amateur"</p>
<hr />
<div>Maurice809<br />
<br />
Je suis passionné d'informatique et de radio amateur</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13171
SDR
2017-02-21T20:18:38Z
<p>Maurice809: /* Participants */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]<br />
* [[User:Maurice809]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13170
SDR
2017-02-21T20:17:50Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -o 2 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=13169
SDR
2017-02-21T20:16:54Z
<p>Maurice809: /* Installation */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
<s><br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
</s><br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
=== Quisk ===<br />
* http://james.ahlstrom.name/quisk/<br />
<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* The project has been closed sourced !<br />
* <s>Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
</s><br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [https://github.com/TLeconte/acarsdec]<br />
<pre><br />
git clone https://github.com/TLeconte/acarsdec.git<br />
cd acarsdec/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README for compiler options<br />
#CFLAGS= -Ofast -pthread -D WITH_RTL -D WITH_ALSA -D WITH_SNDFILE<br />
#LDLIBS= -lm -pthread -lrtlsdr -lasound -lsndfile<br />
<br />
# Airspy conf<br />
# CFLAGS= -Ofast -pthread -D WITH_AIR -I. `pkg-config --cflags libairspy`<br />
# LDLIBS= -lm -pthread `pkg-config --libs libairspy` -lusb-1.0<br />
<br />
# RTL only conf<br />
CFLAGS= -Ofast -pthread -D WITH_RTL -I.<br />
LDLIBS= -lm -pthread -lrtlsdr<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx ===<br />
==== Installation (Linux) ====<br />
<br />
* Debian: <br />
apt-get install gqrx-sdr<br />
<br />
==== Installation (Mac) ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]<br />
* [[User:Rorist]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=11890
SDR
2016-03-28T08:00:15Z
<p>Maurice809: /* Test */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.2/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README<br />
#CFLAGS= -Ofast -msse2 -funroll-loops -pthread -D WITH_RTL -D WITH_ALSA<br />
CFLAGS= -Ofast -mfpu=vfpv4 -funroll-loops -pthread -D WITH_RTL -I.<br />
#CFLAGS= -Ofast -mfpu=neon-vfpv4 -funroll-loops -pthread -D WITH_RTL -I. `pkg-config --cflags libairspy`<br />
</pre><br />
Lancer la command make<br />
<br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=11889
SDR
2016-03-28T07:59:46Z
<p>Maurice809: /* Installation */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.2/<br />
</pre><br />
Modifier l'entête du fichier Makefile<br />
<pre><br />
# See README<br />
#CFLAGS= -Ofast -msse2 -funroll-loops -pthread -D WITH_RTL -D WITH_ALSA<br />
CFLAGS= -Ofast -mfpu=vfpv4 -funroll-loops -pthread -D WITH_RTL -I.<br />
#CFLAGS= -Ofast -mfpu=neon-vfpv4 -funroll-loops -pthread -D WITH_RTL -I. `pkg-config --cflags libairspy`<br />
</pre><br />
Lancer la command make<br />
<br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5837
SDR
2014-08-21T16:23:26Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 -l message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5822
SDR
2014-08-15T13:03:42Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
# add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt &<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5821
SDR
2014-08-13T10:56:02Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
vi run-acars<br />
<br />
add line : <br />
./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & > run-acars<br />
<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5820
SDR
2014-08-13T10:48:08Z
<p>Maurice809: /* Build */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
cd ..<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo ./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & > run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5808
SDR
2014-08-01T14:57:18Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo ./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & > run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5807
SDR
2014-08-01T14:56:54Z
<p>Maurice809: /* Usage */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo ./acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & >run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5806
SDR
2014-08-01T14:55:54Z
<p>Maurice809: /* ACARS */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre><br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo /acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & >run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5805
SDR
2014-08-01T14:55:37Z
<p>Maurice809: /* ACARS */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
</pre<br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo /acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & >run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5804
SDR
2014-08-01T14:53:33Z
<p>Maurice809: /* ACARS */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Installation ====<br />
#Download software ACARS decoder from [http://sourceforge.net/projects/acarsdec/]<br />
<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo /acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & >run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5803
SDR
2014-08-01T14:48:48Z
<p>Maurice809: /* ACARS */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Installation ====<br />
#Download software from [http://sourceforge.net/projects/acarsdec/]<br />
<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
==== Usage ====<br />
<pre><br />
echo /acarsdec -p -8 -r 0 131.525 131.550 131.725 131.825 >> message-acars.txt & >run-acars<br />
chmod u+rwx run-acars<br />
./run-acars<br />
tail -f message-acars.txt<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5802
SDR
2014-08-01T14:44:13Z
<p>Maurice809: /* Installation */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Installation ====<br />
#Download software from [http://sourceforge.net/projects/acarsdec/]<br />
<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
make<br />
</pre><br />
==== Test ====<br />
<pre><br />
./acarsdec -o1 -f test.wav<br />
#2 (E:0) .PH-BXR KL1681 E 5V S53A <br />
#4 (E:0) .LN-DYY DY083J 2 Q0 S46A <br />
#2 (E:0) .LN-DYY DY083J E Q0 S47A <br />
#1 (E:0) .F-GTAE AF7728 G H1 D65C #DFB00000/V206,05,124,183,02,<br />
#1 (E:0) .LN-DYY x _d <br />
#3 (E:0) .G-DBCK BA031T 2 _d S64A <br />
#3 (E:0) .G-DBCK BA031T E Q0 S63A <br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5801
SDR
2014-08-01T14:40:12Z
<p>Maurice809: /* ACARS */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System [http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System]<br />
==== Installation ====<br />
#Download software from [http://sourceforge.net/projects/acarsdec/]<br />
<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
make<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5800
SDR
2014-08-01T14:39:00Z
<p>Maurice809: /* SDR Softwares */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== ACARS ===<br />
Aircraft Communication Addressing and Reporting System <a href="http://fr.wikipedia.org/wiki/Aircraft_Communication_Addressing_and_Reporting_System" target="_blank">WIKIpedia</a><br />
==== Installation ====<br />
#Download software from [http://sourceforge.net/projects/acarsdec/]<br />
<br />
<pre><br />
wget http://sourceforge.net/projects/acarsdec/files/latest/download<br />
tar xvzf download<br />
cd acarsdec-3.0/<br />
sudo apt-get install libsndfile1-dev<br />
sudo apt-get install libasound2-dev<br />
make<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5799
SDR
2014-08-01T13:09:02Z
<p>Maurice809: /* Build */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
sudo cp rtl-sdr.rules /etc/udev/rules.d/<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=SDR&diff=5798
SDR
2014-08-01T13:03:23Z
<p>Maurice809: /* Build */</p>
<hr />
<div>[[Category:Ongoing_Projects]]<br />
== Goal ==<br />
* Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.<br />
<br />
== References ==<br />
* http://sdr.osmocom.org/trac/wiki/rtl-sdr<br />
* http://gnuradio.org/redmine/projects/gnuradio/wiki<br />
* http://spacenear.us/tracker/<br />
* https://en.wikipedia.org/wiki/ISM_band<br />
* http://www.jsansonnens.ch/freq.html<br />
<br />
== SDR at FIXME ==<br />
We currently have two '''rtl_tcp''' instances running at FIXME:<br />
* sdr1.fixme.ch:1234 (62.220.135.211:1234) ([http://www.raspberrypi.org/ Raspberry PI], west window, MC's homemade VHF antenna)<br />
* foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)<br />
<br />
=== Service ===<br />
* The service is started with the following command is listen to the port 1234<br />
sv start rtl-tcp<br />
<br />
== SDR Softwares ==<br />
===GNURadio===<br />
* GNURadio [https://www.cgran.org/browser/projects/multimode/trunk multimode]<br />
* Install on Debian 6<br />
mkdir gnuradio; cd gnuradio<br />
wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio<br />
* On Debian 7: apt-get install gnuradio (???)<br />
<br />
*On arch linux, a working package is in aur so you only need<br />
yaourt -S gnuradio<br />
<br />
* Install and use Multimode<br />
svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode<br />
git clone git://git.osmocom.org/osmo-sdr.git<br />
./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10<br />
<br />
=== RTL-SDR ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install git<br />
sudo apt-get install libusb-1.0-0-dev<br />
sudo apt-get install cmake<br />
sudo apt-get install build-essential<br />
</pre><br />
<br />
==== Build ====<br />
<pre><br />
git clone git://git.osmocom.org/rtl-sdr.git<br />
cd rtl-sdr/<br />
mkdir build<br />
cd build<br />
cmake ../ -DDETACH_KERNEL_DRIVER=ON -DINSTALL_UDEV_RULES=ON<br />
make<br />
sudo make install<br />
sudo ldconfig<br />
</pre><br />
<br />
==== Test the dongle ====<br />
<br />
The test bellow is for a E4000 dongle.<br />
<pre><br />
sdr@alix2:~$ rtl_test -t<br />
Found 1 device(s):<br />
0: Terratec T Stick PLUS<br />
<br />
Using device 0: Terratec T Stick PLUS<br />
Found Elonics E4000 tuner<br />
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0 <br />
Benchmarking E4000 PLL...<br />
[E4K] PLL not locked for 52000000 Hz!<br />
[E4K] PLL not locked for 2225000000 Hz!<br />
[E4K] PLL not locked for 1113000000 Hz!<br />
[E4K] PLL not locked for 1251000000 Hz!<br />
E4K range: 53 to 2224 MHz<br />
E4K L-band gap: 1113 to 1251 MHz<br />
</pre><br />
<br />
==== Use rtl_tcp ====<br />
<br />
To start rtl_tcp on every ethernet interfaces and the port 1234:<br />
<pre><br />
pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0 p 1234<br />
Found 1 device(s).<br />
Found Fitipower FC0013 tuner<br />
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)<br />
Tuned to 100000000 Hz.<br />
listening...<br />
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source<br />
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).<br />
</pre><br />
<br />
<br />
=== SDR# ===<br />
* Replace $ARCH by i386 or x86_64<br />
<pre><br />
ARCH='x86_64'<br />
sudo apt-get install mono-complete monodevelop<br />
sudo apt-get install libportaudio2 <br />
sudo apt-get install subversion<br />
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp<br />
cd sdrsharp<br />
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86<br />
cd Release<br />
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll<br />
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so<br />
mono SDRSharp.exe<br />
</pre><br />
<br />
<br />
To prevent the error below, just modify the file release/SDRSharp.exe.config<br />
and comment the line as follow:<br />
<pre><br />
<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M<br />
</pre><br />
<br />
[[file:sdsharp_error.jpg]]<br />
[[file:sdsharp.jpg||500px]]<br />
<br />
==== References ====<br />
* http://www.rtlsdr.org/softwarelinux<br />
<br />
<br />
=== Multimon-NG ===<br />
<br />
==== Requirement ====<br />
<pre><br />
sudo apt-get install libqt4-dev<br />
sudo apt-get install libpulse-dev<br />
</pre><br />
<br />
==== Build ====<br />
<br />
<pre><br />
git clone https://github.com/EliasOenal/multimonNG.git<br />
cd multimonNG<br />
mkdir build<br />
cd build<br />
qmake ../multimon-ng.pro<br />
make<br />
sudo make install<br />
</pre><br />
<br />
On arch linux, you have the choice between a "stable" version named multimon:<br />
<pre><br />
yaourt -S multimon<br />
</pre><br />
and The dev version:<br />
<pre><br />
yaourt -S multimon-ng-git<br />
</pre><br />
<br />
=== Gqrx (Mac) ===<br />
==== Installation ====<br />
# Download software from [http://gqrx.dk/download here]<br />
# Open .dmg file, you can run the app directly from the image, or copy it into Applications folder<br />
<br />
==== Usage ====<br />
# Select RTL-SDR Spectrum server<br />
# Use device string <pre>rtl_tcp=sdr1.fixme.ch:1234</pre><br />
# Choose your other settings (default works fine), click Ok<br />
# Click on Power button to start listening<br />
# Move around spectrum by clicking on it, or by clicking/right clicking on the frequency numbers<br />
<br />
== Participants ==<br />
* [[User:Mc]]<br />
* [[User:Francois]]</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3975
Movies
2013-02-18T20:11:01Z
<p>Maurice809: </p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* The Net (1995) - http://www.imdb.com/title/tt0113957/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
* Die Hard 4.0 (2007) - http://www.imdb.com/title/tt0337978/<br />
* http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4/ YouTube]<br />
<br />
== Émission de TV ==<br />
* TSR - NOUVO - http://www.nouvo.ch/ <br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3974
Movies
2013-02-18T20:07:45Z
<p>Maurice809: /* Films */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* The Net (1995) - http://www.imdb.com/title/tt0113957/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
* Die Hard 4.0 (2007) - http://www.imdb.com/title/tt0337978/<br />
* http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4/ YouTube]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3973
Movies
2013-02-18T20:07:25Z
<p>Maurice809: /* Films */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* The Net (1995) - http://www.imdb.com/title/tt0113957/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
* Die Hard 4.0 - http://www.imdb.com/title/tt0337978/<br />
* http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4/ YouTube]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3960
Movies
2013-02-18T20:02:29Z
<p>Maurice809: /* Films */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* The Net (1995) - http://www.imdb.com/title/tt0113957/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
<br />
*http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4/ YouTube]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=RaspberryPi1&diff=3958
RaspberryPi1
2013-02-18T20:00:12Z
<p>Maurice809: /* Participants */</p>
<hr />
<div>[[Category:Workshops]]<br />
== Description ==<br />
* 26th February 2013 at 19h<br />
* Share projects and ideas around the Raspberry PI mini-computer<br />
* Short prentations (~10mn) about your projects<br />
* Date: http://framadate.org/l48jvifcabcadjhy<br />
<br />
== Presentations ==<br />
{| class="wikitable"<br />
|+<br />
! Presenter !! Topic !! Duration<br />
|-<br />
|Rorist ||Introduction to the FIXME and to the Raspberry Pi || 5mn<br />
|-<br />
|Rorist ||Minecraft PI Edition with its simple network text protocol || 5mn<br />
|-<br />
|François ||TBD (1-Wire temperature monitoring or XMBC with OpenElec) ||<br />
|-<br />
|Tengu || Take pictures from a D90 using gphoto2 (for now, only theorical, nothing really usefull is done). Scripts are available here: https://gitorious.org/rpishooter but they are crappy. Even bad in fact ;). ||<br />
|-<br />
|Tengu || Manage some alarm with a Raspberry and a [http://www.yubico.com/ Yubikey] (pure theory) ||<br />
|-<br />
|Sasha || Automated torrent seedbox with rTorrent + ruTorrent + auto-irssi/RSS || ~30 min<br />
|-<br />
|Fred || 1-Wire temperature monitoring with [http://owfs.org/ owfs] and Munin || <br />
|-<br />
|Mathias || Software Defined Radio on the Pi and other fun stuff like [http://www.icrobotics.co.uk/wiki/index.php/Turning_the_Raspberry_Pi_Into_an_FM_Transmitter FM transmitter] (if time permits). See also [[SDR]] || <br />
|-<br />
|Polto || Control your radio controlled car from your raspberry pi ||<br />
|-<br />
|| ''Your name here'' || ''Your presentation here!'' || ''15mn''<br />
|}<br />
<br />
== Resources ==<br />
'''Get a Raspberry Pi [[Parts_Order|here]]!'''<br />
<br />
* [http://www.raspberrypi.org/ Official website]<br />
* [http://elinux.org/RaspberryPiBoard eLinux Raspberry Pi Wiki]<br />
* [http://www.posttenebraslab.ch/wiki/association/people/arekkusu/projects/gpio_fun PTL RPI Project]<br />
* [http://pingbin.com/2012/12/30-cool-ideas-raspberry-pi-project/ Cool Ideas]<br />
* [http://edurobot.ch/raspi/ Swiss Raspeberry Pi Users Club]<br />
* [http://lifehacker.com/raspberry-pi/ Lots of tutorials, news (lifehacker)]<br />
* [http://elinux.org/R-Pi_NAS Pi NAS]<br />
* [http://hackaday.com/2012/11/19/raspberry-pi-reaches-critical-mass-as-xbmc-hardware/ Easy XMBC on Pi]<br />
* [http://www.samratamin.com/blog/raspberry-pi-iphone-control-a-rpi-with-an-iphone-in-2-minutes/ Android and iOS GPIO control]<br />
* [http://www.penguintutor.com/linux/raspberrypi-webserver Pi Web Server]<br />
* [https://github.com/adafruit/Adafruit-Raspberry-Pi-Python-Code Python scripts for adafruit electronic]<br />
<br />
== Participants ==<br />
* [[User:Rorist]]<br />
* [[User:Ol1v]]<br />
* [[User:Freestorm]]<br />
* [[User:Sasha]]<br />
* [[User:Maurice809]]<br />
<br />
== See also ==<br />
* [[CPU_Boards]]</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3918
Movies
2013-02-09T17:15:00Z
<p>Maurice809: /* Reportages */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
<br />
*http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4/ YouTube]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3917
Movies
2013-02-09T17:14:17Z
<p>Maurice809: /* Reportages */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
<br />
*http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
* les dieux de l'informatique (strip tease) [http://www.youtube.com/watch?v=__aTZ9Ld0x4]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=Movies&diff=3916
Movies
2013-02-08T10:14:08Z
<p>Maurice809: /* Films */</p>
<hr />
<div>Voici une liste des films ou des reportages en rapport avec l'informatique, les hackerspaces, les Geek.<br />
<br />
== Films ==<br />
* War Games (1983) - http://www.imdb.com/title/tt0086567/<br />
* Antitrust (2001) - http://www.imdb.com/title/tt0218817/<br />
* Short Circuit (1986) - http://www.imdb.com/title/tt0091949/<br />
* Hackers (1995) - http://www.imdb.com/title/tt0113243/<br />
* Pi (1998) - http://www.imdb.com/title/tt0138704/<br />
* Tron (1982) - http://www.imdb.com/title/tt0084827/<br />
* Takedown ''Cybertr@que'' (2000) - http://www.imdb.com/title/tt0159784/ <br />
* 2001: A Space Odyssey ''2001:l'odyssée de l'espace'' (1968) - http://www.imdb.com/title/tt0062622/<br />
* Pirates of Silicon Valley ''Les Pirates de la Silicon Valley'' (1999) - http://www.imdb.com/title/tt0168122/<br />
* The Matrix (1999) - http://www.imdb.com/title/tt0133093/<br />
* Sneakers (1992) http://www.imdb.com/title/tt0105435/<br />
* Blade Runner (1982) - http://www.imdb.com/title/tt0083658/<br />
* eXistenZ (1999) - http://www.imdb.com/title/tt0120907/<br />
* Avalon (2001) - http://www.imdb.com/title/tt0267287/<br />
* 23 (1998) - http://www.imdb.com/title/tt0126765/<br />
* Run Lola Run (1998) - http://www.imdb.com/title/tt0130827/<br />
* The Hitchhiker's Guide to the Galaxy (2005) - http://www.imdb.com/title/tt0371724/<br />
* La belle et l'ordinateur (1984) - http://french.imdb.com/title/tt0087197/<br />
<br />
*http://www.felipemartins.info/2011/03/security-and-hacking-complete-movie-list/<br />
<br />
== Animés ==<br />
* Ghost In The Shell (1995) - http://www.imdb.com/title/tt0113568/<br />
* Akira (1988) - http://www.imdb.com/title/tt0094625/<br />
* A Scanner Darkly (2006) - http://www.imdb.com/title/tt0405296/<br />
<br />
== Reportages ==<br />
* Cyber Guérilla - Hackers, pirates et guerres secrètes - http://winsa.free.fr/wordpress/?p=737<br />
* Les guerriers du WEB - http://www.zonexbe.com/news-web/121-docu-les-guerriers-du-web<br />
* Pir@tage sur FR4 (2011) - http://www.stream-tv.fr/reportage-tv/pirate-hacker-reportage/<br />
* FabLabs, imprimantes 3D et DIY (FR5): [http://blog.france5.fr/le-vinvinteur/2013/01/12/dossier-fablabs-imprimantes-3d-diy/ teaser] [http://www.dailymotion.com/video/xwpidw_le-vinvinteur-n-11-fablabs-nouvelle-revolution-industrielle_creation video]<br />
<br />
== Podcasts ==<br />
* La Grotte Du Barbu http://www.lagrottedubarbu.com/ DIY<br />
* MAKE http://blog.makezine.com/podcast/</div>
Maurice809
https://fixme.ch/w/index.php?title=CPU_Boards&diff=3913
CPU Boards
2013-02-07T18:18:59Z
<p>Maurice809: /* ARM based */</p>
<hr />
<div>A collection of embedded boards with various CPUs.<br />
<br />
'''TODO''': put this information in a table, with info like average pricing, capabilities and peripherals<br />
<br />
Please add boards you know about in the list, may it not be something you would chose for a project..<br />
<br />
== PIC based ==<br />
* http://dangerousprototypes.com/docs/Web_platform_hardware_design<br />
* http://www.evidence.eu.com/content/view/114/204/<br />
* http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en535770<br />
* http://www.microchip.com/microstick<br />
* http://www.sparkfun.com/products/27<br />
* http://www.duinomite.com/<br />
<br />
== Atmel based ==<br />
* http://www.arduino.cc/<br />
* http://www.pjrc.com/teensy/index.html<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.acmesystems.it/?id=BEEBOARD<br />
* http://www.kickstarter.com/projects/kenburns/tinyduino-the-tiny-arduino-compatible-platform-w-s<br />
<br />
== ARM based ==<br />
* [[ARM_Board]]<br />
* http://processors.wiki.ti.com/index.php/OMAP3_Boards<br />
* http://www.acmesystems.it/?id=FOXG20<br />
* http://www.acmesystems.it/?id=NETUSG20<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.embeddedarm.com/products/arm-sbc.php<br />
* http://www.mini-box.com/ARM-Systems<br />
* http://www.evidence.eu.com/content/view/352/426/<br />
* http://elinux.org/RaspberryPiBoard<br />
* http://www.solid-run.com/products/cubox<br />
* http://fit-pc.co.uk/index.php?p=Trimslice<br />
* http://beagleboard.org/bone (OpenSource hardware)<br />
* http://cubieboard.org/<br />
* http://apc.io/<br />
* http://www.hardkernel.com/renewal_2011/main.php<br />
* [https://www.olimex.com/Products/OLinuXino/ OlinuXino]<br />
* [http://www.ti.com/ww/en/launchpad/stellaris_head.html?DCMP=stellaris-launchpad&HQS=stellaris-launchpad-b/ ti Stellaris]<br />
* [http://www.pandaboard.org/ PandaBoard]<br />
<br />
== x86 based ==<br />
* http://pcengines.ch/alix.htm<br />
* http://www.embeddedarm.com/products/x86-sbc.php<br />
* http://bifferos.co.uk/<br />
* http://www.via.com.tw/en/products/embedded/boards/<br />
* http://www.mini-box.com/Mini-ITX-systems-x86<br />
* http://emlix.com/bsp-packages0.html?&language=en<br />
* http://www.axiomtek.de/<br />
* http://www.baudisch.de/-en<br />
* http://www.review-displays.co.uk/acatalog/single-board-computers.html<br />
* http://www.lantronix.com/device-networking/embedded-device-servers/xport-pro-linux-dev-kit.html basically serial port with an ethernet connector. not sure about architecture though..<br />
* http://soekris.eu/shop/index.php?language=en<br />
<br />
== FPGA ==<br />
* http://www.acmesystems.it/?id=COLIBRI<br />
* http://fpga4u.epfl.ch/<br />
* http://www.xilinx.com/products/silicon-devices/fpga/index.htm<br />
* http://www.altera.com/<br />
* http://www.latticesemi.com/products/fpga/index.cfm?source=topnav<br />
* http://www.actel.com/products/devices.aspx<br />
* http://www.siliconbluetech.com/products/devices.aspx<br />
* http://erika.tuxfamily.org/fpg-eye-fpga-board-with-lattice-xp2-and-mico32.html<br />
* [http://www.wayengineer.com/index.php?main_page=product_info&products_id=159/ Digiasic]<br />
<br />
== External lists, providers for misc boards ==<br />
* http://free-electrons.com/community/hardware/boards/<br />
* http://www.olimex.com/ quite a few PIC/Duino/ARM/AVR/..boards, they give free dev boards for interesting projetcs that publish their code!</div>
Maurice809
https://fixme.ch/w/index.php?title=CPU_Boards&diff=3912
CPU Boards
2013-02-07T18:15:32Z
<p>Maurice809: /* FPGA */</p>
<hr />
<div>A collection of embedded boards with various CPUs.<br />
<br />
'''TODO''': put this information in a table, with info like average pricing, capabilities and peripherals<br />
<br />
Please add boards you know about in the list, may it not be something you would chose for a project..<br />
<br />
== PIC based ==<br />
* http://dangerousprototypes.com/docs/Web_platform_hardware_design<br />
* http://www.evidence.eu.com/content/view/114/204/<br />
* http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en535770<br />
* http://www.microchip.com/microstick<br />
* http://www.sparkfun.com/products/27<br />
* http://www.duinomite.com/<br />
<br />
== Atmel based ==<br />
* http://www.arduino.cc/<br />
* http://www.pjrc.com/teensy/index.html<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.acmesystems.it/?id=BEEBOARD<br />
* http://www.kickstarter.com/projects/kenburns/tinyduino-the-tiny-arduino-compatible-platform-w-s<br />
<br />
== ARM based ==<br />
* [[ARM_Board]]<br />
* http://processors.wiki.ti.com/index.php/OMAP3_Boards<br />
* http://www.acmesystems.it/?id=FOXG20<br />
* http://www.acmesystems.it/?id=NETUSG20<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.embeddedarm.com/products/arm-sbc.php<br />
* http://www.mini-box.com/ARM-Systems<br />
* http://www.evidence.eu.com/content/view/352/426/<br />
* http://elinux.org/RaspberryPiBoard<br />
* http://www.solid-run.com/products/cubox<br />
* http://fit-pc.co.uk/index.php?p=Trimslice<br />
* http://beagleboard.org/bone (OpenSource hardware)<br />
* http://cubieboard.org/<br />
* http://apc.io/<br />
* http://www.hardkernel.com/renewal_2011/main.php<br />
* [https://www.olimex.com/Products/OLinuXino/ OlinuXino]<br />
* [http://www.pandaboard.org/ PandaBoard]<br />
<br />
== x86 based ==<br />
* http://pcengines.ch/alix.htm<br />
* http://www.embeddedarm.com/products/x86-sbc.php<br />
* http://bifferos.co.uk/<br />
* http://www.via.com.tw/en/products/embedded/boards/<br />
* http://www.mini-box.com/Mini-ITX-systems-x86<br />
* http://emlix.com/bsp-packages0.html?&language=en<br />
* http://www.axiomtek.de/<br />
* http://www.baudisch.de/-en<br />
* http://www.review-displays.co.uk/acatalog/single-board-computers.html<br />
* http://www.lantronix.com/device-networking/embedded-device-servers/xport-pro-linux-dev-kit.html basically serial port with an ethernet connector. not sure about architecture though..<br />
* http://soekris.eu/shop/index.php?language=en<br />
<br />
== FPGA ==<br />
* http://www.acmesystems.it/?id=COLIBRI<br />
* http://fpga4u.epfl.ch/<br />
* http://www.xilinx.com/products/silicon-devices/fpga/index.htm<br />
* http://www.altera.com/<br />
* http://www.latticesemi.com/products/fpga/index.cfm?source=topnav<br />
* http://www.actel.com/products/devices.aspx<br />
* http://www.siliconbluetech.com/products/devices.aspx<br />
* http://erika.tuxfamily.org/fpg-eye-fpga-board-with-lattice-xp2-and-mico32.html<br />
* [http://www.wayengineer.com/index.php?main_page=product_info&products_id=159/ Digiasic]<br />
<br />
== External lists, providers for misc boards ==<br />
* http://free-electrons.com/community/hardware/boards/<br />
* http://www.olimex.com/ quite a few PIC/Duino/ARM/AVR/..boards, they give free dev boards for interesting projetcs that publish their code!</div>
Maurice809
https://fixme.ch/w/index.php?title=CPU_Boards&diff=3911
CPU Boards
2013-02-07T18:12:28Z
<p>Maurice809: /* ARM based */</p>
<hr />
<div>A collection of embedded boards with various CPUs.<br />
<br />
'''TODO''': put this information in a table, with info like average pricing, capabilities and peripherals<br />
<br />
Please add boards you know about in the list, may it not be something you would chose for a project..<br />
<br />
== PIC based ==<br />
* http://dangerousprototypes.com/docs/Web_platform_hardware_design<br />
* http://www.evidence.eu.com/content/view/114/204/<br />
* http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en535770<br />
* http://www.microchip.com/microstick<br />
* http://www.sparkfun.com/products/27<br />
* http://www.duinomite.com/<br />
<br />
== Atmel based ==<br />
* http://www.arduino.cc/<br />
* http://www.pjrc.com/teensy/index.html<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.acmesystems.it/?id=BEEBOARD<br />
* http://www.kickstarter.com/projects/kenburns/tinyduino-the-tiny-arduino-compatible-platform-w-s<br />
<br />
== ARM based ==<br />
* [[ARM_Board]]<br />
* http://processors.wiki.ti.com/index.php/OMAP3_Boards<br />
* http://www.acmesystems.it/?id=FOXG20<br />
* http://www.acmesystems.it/?id=NETUSG20<br />
* http://www.ethernut.de/en/hardware/ethernuts.html<br />
* http://www.embeddedarm.com/products/arm-sbc.php<br />
* http://www.mini-box.com/ARM-Systems<br />
* http://www.evidence.eu.com/content/view/352/426/<br />
* http://elinux.org/RaspberryPiBoard<br />
* http://www.solid-run.com/products/cubox<br />
* http://fit-pc.co.uk/index.php?p=Trimslice<br />
* http://beagleboard.org/bone (OpenSource hardware)<br />
* http://cubieboard.org/<br />
* http://apc.io/<br />
* http://www.hardkernel.com/renewal_2011/main.php<br />
* [https://www.olimex.com/Products/OLinuXino/ OlinuXino]<br />
* [http://www.pandaboard.org/ PandaBoard]<br />
<br />
== x86 based ==<br />
* http://pcengines.ch/alix.htm<br />
* http://www.embeddedarm.com/products/x86-sbc.php<br />
* http://bifferos.co.uk/<br />
* http://www.via.com.tw/en/products/embedded/boards/<br />
* http://www.mini-box.com/Mini-ITX-systems-x86<br />
* http://emlix.com/bsp-packages0.html?&language=en<br />
* http://www.axiomtek.de/<br />
* http://www.baudisch.de/-en<br />
* http://www.review-displays.co.uk/acatalog/single-board-computers.html<br />
* http://www.lantronix.com/device-networking/embedded-device-servers/xport-pro-linux-dev-kit.html basically serial port with an ethernet connector. not sure about architecture though..<br />
* http://soekris.eu/shop/index.php?language=en<br />
<br />
== FPGA ==<br />
* http://www.acmesystems.it/?id=COLIBRI<br />
* http://fpga4u.epfl.ch/<br />
* http://www.xilinx.com/products/silicon-devices/fpga/index.htm<br />
* http://www.altera.com/<br />
* http://www.latticesemi.com/products/fpga/index.cfm?source=topnav<br />
* http://www.actel.com/products/devices.aspx<br />
* http://www.siliconbluetech.com/products/devices.aspx<br />
* http://erika.tuxfamily.org/fpg-eye-fpga-board-with-lattice-xp2-and-mico32.html<br />
<br />
== External lists, providers for misc boards ==<br />
* http://free-electrons.com/community/hardware/boards/<br />
* http://www.olimex.com/ quite a few PIC/Duino/ARM/AVR/..boards, they give free dev boards for interesting projetcs that publish their code!</div>
Maurice809