Fixme.ch - User contributions [en]

User:Speredenn

2021-07-13T11:55:51Z

Speredenn: Speredenn moved page User:Speredenn to User:Ipsync: User rename

#REDIRECT [[User:Ipsync]]

User:Ipsync

2021-07-13T11:55:50Z

Speredenn: Speredenn moved page User:Speredenn to User:Ipsync: User rename

User:Ipsync

2021-06-22T12:09:23Z

Speredenn: Deletion of old information

User:Ipsync

2013-02-13T20:39:22Z

Speredenn:

Hello!

I'm an enthousiast technophile, curious and passionate. I live in '''GNU Emacs''', and maildir rocks! I'm @[https://twitter.com/speredenn speredenn] on twitter.

My gpg key fingerprint is ECB0 F5B7 C311 FDEA 6565 4B82 47BB C394 FB49 368D. '''CHECK IT DIRECTLY WITH ME BEFORE USING THE IDs BELOW'''.

== SSH key ==
Contact me to check my key fingerprint, then check the signature before authorizing the key on your server (replace the "[at]" by an at sign).

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvbB5hA+oG7Yq7twPT092LQ6iDh3nF856UP9Eeblg+bT2gRghCgqvulCsVi1xNASfOfNfjYFals1mbxt52E/XS9iLnOfAzjYfeRuGdo+Mfu//HUCoc7gp9yPp0VkJ8xFmS17KcGr6ufltPFxgfJfnNM7/9Zac21sa0Io7xDfbvVzgLPomcZRqw0SP2cHxcU2WrQP7Jj6hPY5gmuQzxDy+ZhtG0rLTRWsjzWjkSiidYfLR0lcCXAgitygFDYW3yWLV6dva7tQKzw3j6cYiK0DmCjH9nx+/R6q1MapkQRGJ3wQ4LcaHWOII0xrxW86sUYQQtNn7oOk+Y7c/+0xGGE1FB jbc[at]0x1d.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAKjAAoJEEe7w5T7STaNAJ4H/Avy2ZdddgMs7EoQ5sru8E2B
ErVw2YmQ0ysv8VUD7lUMaoqrZT5sXY/lHq7OkS2zcEEZStgYjjWUNF+zi5qF2EVN
otNovEMs9MftsEJEKFwlPnl8aap92XxF10Nkb0tnhG338ko9w/Hm924h512G3CDS
7osKtu6vYuhmEjFyupF/WRGpIMCok8/1Hh8gAbS4v03XKfe3fZs2Jf4xwQ5TmebC
vKGa7YnJl517kezmiANedFox8D5HW8MCvG4+rGAvTmdYyVixhZp3wAO+Y0klCnBm
xzlhKY+UvXyqfdJNPcspl7FaoZCjkORx5isucpmuRP5T4ENhJBwnrQxQGHqqpTU=
=cyAm
-----END PGP SIGNATURE-----
</pre>

== XMPP OTR fingerprint ==
Contact me to check my key fingerprint, then check the signature before validating the OTR fingerprint in your client.

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

5984989A CC9E7BEF 85CAF01D 15211C17 577476D3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAWuAAoJEEe7w5T7STaNIWEIAKjuwrj+i2pzOzjvJ2xOK2Xv
If6nSlhyBKCP8I+D0SSa8rFq8eDQOI22PkGApP8udhw1aKyTR1zzOLGvETz0VA5W
xIypsQh4cNTDfjA5TWobXAm3+aSVnHjn0vuJRsEW6bbJG1xftvmspeQwK6HHGxoL
1Y5vUP/9A5sr9wT82khdgWTHZ7IIi7FfzITRfZVG3i5GkDKLnlomJ7G7lvLg5Sd3
EGTYdP9ZixJalHfhrBTWHcSYXUgkeciae8otqbfhPosLG4VrVZvolHfnoZYPfZVO
V2unNxG/yMu0pgDvJ1nQpaDfD0WeV7Lk4B67Vd4bulYKCbRZWbYtPsMQj56J4ak=
=m7M5
-----END PGP SIGNATURE-----
</pre>

User:Ipsync

2013-02-13T20:38:32Z

Speredenn: /* SSH key */

Hello!

I'm an enthousiast technophile, curious and passionate. I live in '''GNU Emacs''', and maildir rocks! I'm @[https://twitter.com/speredenn speredenn] on twitter.

My gpg key fingerprint is ECB0 F5B7 C311 FDEA 6565 4B82 47BB C394 FB49 368D. CHECK IT DIRECTLY WITH ME BEFORE USING THE IDs BELOW.

== SSH key ==
Contact me to check my key fingerprint, then check the signature before authorizing the key on your server (replace the "[at]" by an at sign).

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvbB5hA+oG7Yq7twPT092LQ6iDh3nF856UP9Eeblg+bT2gRghCgqvulCsVi1xNASfOfNfjYFals1mbxt52E/XS9iLnOfAzjYfeRuGdo+Mfu//HUCoc7gp9yPp0VkJ8xFmS17KcGr6ufltPFxgfJfnNM7/9Zac21sa0Io7xDfbvVzgLPomcZRqw0SP2cHxcU2WrQP7Jj6hPY5gmuQzxDy+ZhtG0rLTRWsjzWjkSiidYfLR0lcCXAgitygFDYW3yWLV6dva7tQKzw3j6cYiK0DmCjH9nx+/R6q1MapkQRGJ3wQ4LcaHWOII0xrxW86sUYQQtNn7oOk+Y7c/+0xGGE1FB jbc[at]0x1d.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAKjAAoJEEe7w5T7STaNAJ4H/Avy2ZdddgMs7EoQ5sru8E2B
ErVw2YmQ0ysv8VUD7lUMaoqrZT5sXY/lHq7OkS2zcEEZStgYjjWUNF+zi5qF2EVN
otNovEMs9MftsEJEKFwlPnl8aap92XxF10Nkb0tnhG338ko9w/Hm924h512G3CDS
7osKtu6vYuhmEjFyupF/WRGpIMCok8/1Hh8gAbS4v03XKfe3fZs2Jf4xwQ5TmebC
vKGa7YnJl517kezmiANedFox8D5HW8MCvG4+rGAvTmdYyVixhZp3wAO+Y0klCnBm
xzlhKY+UvXyqfdJNPcspl7FaoZCjkORx5isucpmuRP5T4ENhJBwnrQxQGHqqpTU=
=cyAm
-----END PGP SIGNATURE-----
</pre>

== XMPP OTR fingerprint ==
Contact me to check my key fingerprint, then check the signature before validating the OTR fingerprint in your client.

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

5984989A CC9E7BEF 85CAF01D 15211C17 577476D3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAWuAAoJEEe7w5T7STaNIWEIAKjuwrj+i2pzOzjvJ2xOK2Xv
If6nSlhyBKCP8I+D0SSa8rFq8eDQOI22PkGApP8udhw1aKyTR1zzOLGvETz0VA5W
xIypsQh4cNTDfjA5TWobXAm3+aSVnHjn0vuJRsEW6bbJG1xftvmspeQwK6HHGxoL
1Y5vUP/9A5sr9wT82khdgWTHZ7IIi7FfzITRfZVG3i5GkDKLnlomJ7G7lvLg5Sd3
EGTYdP9ZixJalHfhrBTWHcSYXUgkeciae8otqbfhPosLG4VrVZvolHfnoZYPfZVO
V2unNxG/yMu0pgDvJ1nQpaDfD0WeV7Lk4B67Vd4bulYKCbRZWbYtPsMQj56J4ak=
=m7M5
-----END PGP SIGNATURE-----
</pre>

User:Ipsync

2013-02-13T20:38:03Z

Speredenn: /* SSH key */

Hello!

I'm an enthousiast technophile, curious and passionate. I live in '''GNU Emacs''', and maildir rocks! I'm @[https://twitter.com/speredenn speredenn] on twitter.

My gpg key fingerprint is ECB0 F5B7 C311 FDEA 6565 4B82 47BB C394 FB49 368D. CHECK IT DIRECTLY WITH ME BEFORE USING THE IDs BELOW.

== SSH key ==
Contact me to check my key fingerprint, then check the signature before authorizing the key on your server (replace the "[at]" by an at sign).

<pre>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvbB5hA+oG7Yq7twPT092LQ6iDh3nF856UP9Eeblg+bT2gRghCgqvulCsVi1xNASfOfNfjYFals1mbxt52E/XS9iLnOfAzjYfeRuGdo+Mfu//HUCoc7gp9yPp0VkJ8xFmS17KcGr6ufltPFxgfJfnNM7/9Zac21sa0Io7xDfbvVzgLPomcZRqw0SP2cHxcU2WrQP7Jj6hPY5gmuQzxDy+ZhtG0rLTRWsjzWjkSiidYfLR0lcCXAgitygFDYW3yWLV6dva7tQKzw3j6cYiK0DmCjH9nx+/R6q1MapkQRGJ3wQ4LcaHWOII0xrxW86sUYQQtNn7oOk+Y7c/+0xGGE1FB jbc[at]0x1d.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAKjAAoJEEe7w5T7STaNAJ4H/Avy2ZdddgMs7EoQ5sru8E2B
ErVw2YmQ0ysv8VUD7lUMaoqrZT5sXY/lHq7OkS2zcEEZStgYjjWUNF+zi5qF2EVN
otNovEMs9MftsEJEKFwlPnl8aap92XxF10Nkb0tnhG338ko9w/Hm924h512G3CDS
7osKtu6vYuhmEjFyupF/WRGpIMCok8/1Hh8gAbS4v03XKfe3fZs2Jf4xwQ5TmebC
vKGa7YnJl517kezmiANedFox8D5HW8MCvG4+rGAvTmdYyVixhZp3wAO+Y0klCnBm
xzlhKY+UvXyqfdJNPcspl7FaoZCjkORx5isucpmuRP5T4ENhJBwnrQxQGHqqpTU=
=cyAm
-----END PGP SIGNATURE-----
</pre>

== XMPP OTR fingerprint ==
Contact me to check my key fingerprint, then check the signature before validating the OTR fingerprint in your client.

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

5984989A CC9E7BEF 85CAF01D 15211C17 577476D3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAWuAAoJEEe7w5T7STaNIWEIAKjuwrj+i2pzOzjvJ2xOK2Xv
If6nSlhyBKCP8I+D0SSa8rFq8eDQOI22PkGApP8udhw1aKyTR1zzOLGvETz0VA5W
xIypsQh4cNTDfjA5TWobXAm3+aSVnHjn0vuJRsEW6bbJG1xftvmspeQwK6HHGxoL
1Y5vUP/9A5sr9wT82khdgWTHZ7IIi7FfzITRfZVG3i5GkDKLnlomJ7G7lvLg5Sd3
EGTYdP9ZixJalHfhrBTWHcSYXUgkeciae8otqbfhPosLG4VrVZvolHfnoZYPfZVO
V2unNxG/yMu0pgDvJ1nQpaDfD0WeV7Lk4B67Vd4bulYKCbRZWbYtPsMQj56J4ak=
=m7M5
-----END PGP SIGNATURE-----
</pre>

User:Ipsync

2013-02-13T20:35:45Z

Speredenn: update with signed key and signed OTR for xmpp

Hello!

I'm an enthousiast technophile, curious and passionate. I live in '''GNU Emacs''', and maildir rocks! I'm @[https://twitter.com/speredenn speredenn] on twitter.

My gpg key fingerprint is ECB0 F5B7 C311 FDEA 6565 4B82 47BB C394 FB49 368D. CHECK IT DIRECTLY WITH ME BEFORE USING THE IDs BELOW.

== SSH key ==
Contact me to check my key fingerprint, then check the signature before authorizing the key on your server (replace the "[at]" by an at sign).

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvbB5hA+oG7Yq7twPT092LQ6iDh3nF856UP9Eeblg+bT2gRghCgqvulCsVi1xNASfOfNfjYFals1mbxt52E/XS9iLnOfAzjYfeRuGdo+Mfu//HUCoc7gp9yPp0VkJ8xFmS17KcGr6ufltPFxgfJfnNM7/9Zac21sa0Io7xDfbvVzgLPomcZRqw0SP2cHxcU2WrQP7Jj6hPY5gmuQzxDy+ZhtG0rLTRWsjzWjkSiidYfLR0lcCXAgitygFDYW3yWLV6dva7tQKzw3j6cYiK0DmCjH9nx+/R6q1MapkQRGJ3wQ4LcaHWOII0xrxW86sUYQQtNn7oOk+Y7c/+0xGGE1FB jbc[at]0x1d.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAKjAAoJEEe7w5T7STaNAJ4H/Avy2ZdddgMs7EoQ5sru8E2B
ErVw2YmQ0ysv8VUD7lUMaoqrZT5sXY/lHq7OkS2zcEEZStgYjjWUNF+zi5qF2EVN
otNovEMs9MftsEJEKFwlPnl8aap92XxF10Nkb0tnhG338ko9w/Hm924h512G3CDS
7osKtu6vYuhmEjFyupF/WRGpIMCok8/1Hh8gAbS4v03XKfe3fZs2Jf4xwQ5TmebC
vKGa7YnJl517kezmiANedFox8D5HW8MCvG4+rGAvTmdYyVixhZp3wAO+Y0klCnBm
xzlhKY+UvXyqfdJNPcspl7FaoZCjkORx5isucpmuRP5T4ENhJBwnrQxQGHqqpTU=
=cyAm
-----END PGP SIGNATURE-----
</pre>

== XMPP OTR fingerprint ==
Contact me to check my key fingerprint, then check the signature before validating the OTR fingerprint in your client.

<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

5984989A CC9E7BEF 85CAF01D 15211C17 577476D3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)

iQEcBAEBAgAGBQJRHAWuAAoJEEe7w5T7STaNIWEIAKjuwrj+i2pzOzjvJ2xOK2Xv
If6nSlhyBKCP8I+D0SSa8rFq8eDQOI22PkGApP8udhw1aKyTR1zzOLGvETz0VA5W
xIypsQh4cNTDfjA5TWobXAm3+aSVnHjn0vuJRsEW6bbJG1xftvmspeQwK6HHGxoL
1Y5vUP/9A5sr9wT82khdgWTHZ7IIi7FfzITRfZVG3i5GkDKLnlomJ7G7lvLg5Sd3
EGTYdP9ZixJalHfhrBTWHcSYXUgkeciae8otqbfhPosLG4VrVZvolHfnoZYPfZVO
V2unNxG/yMu0pgDvJ1nQpaDfD0WeV7Lk4B67Vd4bulYKCbRZWbYtPsMQj56J4ak=
=m7M5
-----END PGP SIGNATURE-----
</pre>

HackerspacesDinner

2012-08-03T13:46:32Z

Speredenn: /* Participant */

[[Category:Proposed_Projects]]
== Description ==
Meet hackers from Romandie, have dinner and talk about projects.

== Components ==
* PTL
* Hackburg
* FIXME
* Neuch Fablab
* ...

== Schedule ==
* TBD

== Participant ==
* [[User:rorist]]
* [[User:speredenn]]

SixthSense

2012-07-27T07:08:30Z

Speredenn:

[[Category:Proposed_Projects]]
== Description ==
The goal in the beginning is to test and have fun with a first implementation.
Then, we could go for more integrated version if we're convinced.
That's why I plan to use used components when possible, trying to buy only the projector at first.

* General information: http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html
* Sources: https://github.com/sixthsense/sixthsense
* Documentation: https://code.google.com/p/sixthsense/wiki/Software

== Components ==
* Camera: Have we a wireless webcam?
** Logitech QuickCam Pro for notebooks if we buy? http://www.amazon.com/AAXA-Technologies-P1Jr-Hand-held-Projector/dp/B0042TUOTC/ref=sr_1_5?ie=UTF8&s=electronics&qid=1299270933&sr=8-5
** We have one or two old webcams at hs
* Mini-projector: I guess we have none.
** New-P1Jr Pico Projector - KP10001? http://www.amazon.com/Logitech-Quickcam-for-Notebooks-Pro/dp/B000BBYH8O/ref=sr_1_3?ie=UTF8&qid=1299271109&sr=8-3
* Portable computing device: for a first version, some netbook with Microsoft Windows on it or one of our laptops may be ok.

== Participant ==
* [[User:Speredenn]]

Roles

2012-07-27T07:01:07Z

Speredenn: /* Cleaning */

= Communication =
[[User:Raphsnts]]
* Annonce special events on the Internet (fixme.ch, techup.ch, facebook, google plus, Twitter)
* Schedule and speak to the Press

= Drink =
<s>[[User:Freestorm]]</s>
* Order drinks
* Count the drinks money and report on the money book
* Define what kind of drinks we need
* Define the price
* Look at the fridge if all is Okay

= Cleaning =
[[User:Speredenn]]
* Check if the space is clean
* Remember people to clean after they use, if needed
* Check if the trashes are empty and put them outsite when necessary
* Check if we have what we need to clean (plastic bags for example)
* Make sure that the tables and the chairs are clean
* Keep the space organised

= Electronic stock =
[[User:Eric_st]]
* organise the electronic stock
* Order components
* Advices about electronic components

= Events =
<s>[[User:Ol1v]]</s> (Not in the space anymore)
* Make sure that everything is okay for the event (is the speaker ready, we have the needed material, etc)
* Make sure event are advertised: fixme.ch, techup.ch, twitter, ... (use the communication responsible if necessary)

= Bibliotech =
FIXME [[User:Oenvoyage]]
* Add/delete books to the database
* Lent books in the db
* Make sure that all the books are there and not damaged

= Network (NOC) =
[[User:Francois]]
* Internet connection
* Local area network
* Security

= System administration =
[[User:Gcmalloc]]
* [[Internal_Server]]
* Workstations
* OS updates
* Backup
* Security

= Services maintenance =
[[User:Rorist]]
* Wikis, Web, Bouncer, music streaming, password manager, ...

User:Ipsync

2012-05-11T21:07:28Z

Speredenn: Init

Hello!

I'm an enthousiast technophile, curious and passionate. I live in '''GNU Emacs''', and maildir rocks! I'm @[https://twitter.com/speredenn speredenn] on twitter.

My (new) SSH Public key:
<pre style="white-space: pre-wrap;
white-space: -moz-pre-wrap;
word-wrap: break-word">
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvbB5hA+oG7Yq7twPT092LQ6iDh3nF856UP9Eeblg+bT2gRghCgqvulCsVi1xNASfOfNfjYFals1mbxt52E/XS9iLnOfAzjYfeRuGdo+Mfu//HUCoc7gp9yPp0VkJ8xFmS17KcGr6ufltPFxgfJfnNM7/9Zac21sa0Io7xDfbvVzgLPomcZRqw0SP2cHxcU2WrQP7Jj6hPY5gmuQzxDy+ZhtG0rLTRWsjzWjkSiidYfLR0lcCXAgitygFDYW3yWLV6dva7tQKzw3j6cYiK0DmCjH9nx+/R6q1MapkQRGJ3wQ4LcaHWOII0xrxW86sUYQQtNn7oOk+Y7c/+0xGGE1FB jbc[at]0x1d.org
</pre>

CodingNight2

2012-03-16T18:28:12Z

Speredenn: /* Projects Proposition */

[[Category:CodingNight]]
* 16th march 2012 at 18h
* It will be during the [http://hackerspaces.org/wiki/Synchronous_Hackathon/2012-03-17 synchronous hackerspaces.org hackathon]

= Projects Proposition =
Just add your project down the list :)
The proposed projects are:

* The unused ideas from [[CodingNight1]] could be reused.
* A webapp to search for electronic component on different site and find the cheapest easily.
* A simple way to add key and create repository on top of gitosis (something very light).
* An mpd plugin for soundcloud.
* A pizza CLI interface for pizza.ch or pizza around the hackerspace.
* Display the actual song, previous song and next song of mpd in a browser in an asynchronous fashion.
* Little game for the rmll, sound related.
* App for holycow ordering?
* CTF challenge creation (custom service on a serveur port in order to give challenge to solve. If solved, access granted?)

CodingNight2

2012-03-16T18:25:16Z

Speredenn: /* Projects Proposition */

Apéro voisins

2012-02-10T12:53:01Z

Speredenn: /* Components */

[[Category:Ongoing_Projects]]
== Description ==
Presentation of the association, visit of the local, aperitif

== Components ==
* Vin blanc ~6 bouteilles
** JB: 3 bouteilles de valaisan
** speredenn: 3 bouteilles
* Fromage
* Charcuterie
* Pain
** JB: 1 pain paysan
* Soupe champenoise (Nemen)

== Schedule ==
* 15.02.2012 at 20h
* Invitation [[File:Invitation_apero.odt]]

== Participant ==
* Neighbourhood

Apéro voisins

2012-02-09T06:45:45Z

Speredenn: /* Components */

[[Category:Ongoing_Projects]]
== Description ==
Presentation of the association, visit of the local, aperitif

== Components ==
* Vin blanc ~6 bouteilles
** JB: 3 bouteilles de valaisan
** speredenn: 2 bouteilles
* Fromage
* Charcuterie
* Pain
** JB: 1 pain paysan
* Soupe champenoise (Nemen)

== Schedule ==
* 15.02.2012 at 20h
* Invitation [[File:Invitation_apero.odt]]

== Participant ==
* Neighbourhood

SixthSense

2012-02-04T12:09:39Z

Speredenn: Cat. added

[[Category:Ongoing_Projects]]
The goal in the beginning is to test and have fun with a first implementation. Then, we could go for more integrated version if we're convinced. That's why I plan to use used components when possible, trying to buy only the projector at first.

General information :
http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html

Github original project:
https://github.com/sixthsense/sixthsense

Source:
https://code.google.com/p/sixthsense/wiki/Software

Hardware:

- Camera: Have we a wireless webcam? Logitech QuickCam Pro for notebooks if we buy? http://www.amazon.com/AAXA-Technologies-P1Jr-Hand-held-Projector/dp/B0042TUOTC/ref=sr_1_5?ie=UTF8&s=electronics&qid=1299270933&sr=8-5

- Mini-projector: I guess we have none. New-P1Jr Pico Projector - KP10001? http://www.amazon.com/Logitech-Quickcam-for-Notebooks-Pro/dp/B000BBYH8O/ref=sr_1_3?ie=UTF8&qid=1299271109&sr=8-3

- Portable computing device: for a first version, some netbook with Microsoft Windows on it or one of our laptops may be ok.

SixthSense

2012-02-04T12:05:33Z

Speredenn: Init

The goal in the beginning is to test and have fun with a first implementation. Then, we could go for more integrated version if we're convinced. That's why I plan to use used components when possible, trying to buy only the projector at first.

General information :
http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html

Github original project:
https://github.com/sixthsense/sixthsense

Source:
https://code.google.com/p/sixthsense/wiki/Software

Hardware:

- Camera: Have we a wireless webcam? Logitech QuickCam Pro for notebooks if we buy? http://www.amazon.com/AAXA-Technologies-P1Jr-Hand-held-Projector/dp/B0042TUOTC/ref=sr_1_5?ie=UTF8&s=electronics&qid=1299270933&sr=8-5

- Mini-projector: I guess we have none. New-P1Jr Pico Projector - KP10001? http://www.amazon.com/Logitech-Quickcam-for-Notebooks-Pro/dp/B000BBYH8O/ref=sr_1_3?ie=UTF8&qid=1299271109&sr=8-3

- Portable computing device: for a first version, some netbook with Microsoft Windows on it or one of our laptops may be ok.

SixthSense

2012-02-04T12:03:50Z

Speredenn:

General information :
http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html

Github original project:
https://github.com/sixthsense/sixthsense

Source:
https://code.google.com/p/sixthsense/wiki/Software

Hardware:

- Camera: Have we a wireless webcam? Logitech QuickCam Pro for notebooks if we buy? http://www.amazon.com/AAXA-Technologies-P1Jr-Hand-held-Projector/dp/B0042TUOTC/ref=sr_1_5?ie=UTF8&s=electronics&qid=1299270933&sr=8-5

- Mini-projector: I guess we have none. New-P1Jr Pico Projector - KP10001? http://www.amazon.com/Logitech-Quickcam-for-Notebooks-Pro/dp/B000BBYH8O/ref=sr_1_3?ie=UTF8&qid=1299271109&sr=8-3

- Portable computing device: for a first version, some netbook with Microsoft Windows on it or one of our laptops may be ok.

SixthSense

2012-02-04T12:03:38Z

Speredenn:

General information :
http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html

Github original project:
https://github.com/sixthsense/sixthsense

Source:
https://code.google.com/p/sixthsense/wiki/Software

Hardware:
- Camera: Have we a wireless webcam? Logitech QuickCam Pro for notebooks if we buy? http://www.amazon.com/AAXA-Technologies-P1Jr-Hand-held-Projector/dp/B0042TUOTC/ref=sr_1_5?ie=UTF8&s=electronics&qid=1299270933&sr=8-5
- Mini-projector: I guess we have none. New-P1Jr Pico Projector - KP10001? http://www.amazon.com/Logitech-Quickcam-for-Notebooks-Pro/dp/B000BBYH8O/ref=sr_1_3?ie=UTF8&qid=1299271109&sr=8-3
- Portable computing device: for a first version, some netbook with Microsoft Windows on it or one of our laptops may be ok.

SixthSense

2012-02-04T11:59:27Z

Speredenn: Created page with " General information : http://www.lesnumeriques.com/sixthsense-devient-open-source-genie-technologique-en-liberte-n23136.html Github original project: https://github.com/sixths..."

Power Supply with an ATX PSU

2012-02-04T11:54:42Z

Speredenn: closing project

[[Category:Closed_Projects]]

= Description =
Create a lab Power Supply from an [https://en.wikipedia.org/wiki/Power_Supply_Unit_%28Computer%29 ATX PSU].

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100538/fr 100538]
|Laboratory socket black ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100540/fr 100540]
|Laboratory socket red ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100546/fr 100546]
|Laboratory socket green ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100544/fr 100544]
|Laboratory socket yellow ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100542/fr 100542]
|Laboratory socket blue ø 4 mm
|4.-
|-
|}

= Price =
Depends of connectors number and of availability of an old working ATX PSU.

= Voltage =
* +5VDC
* +3.3VDC
* +12VDC
* -12VDC

= People involved =
*Fred
*Speredenn

= Links =
http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

http://www.instructables.com/id/How-To-Build-A-Power-Supply-For-Electronics-Hobby/

= Pictures =
[[File:PSU_1.JPG|200px]]
[[File:PSU_2.JPG|200px]]
[[File:PSU_3.JPG|200px]]
[[File:PSU_4.JPG|200px]]

= Update: PSU with regulate output =

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical. However, if the system uses a micro-controller (see Buck converter below), a digital screen could be an option. That would also be great to have a current limiter on that regulated output.

Linear regulators are excluded for this improvement because they dissipate way to much energy. A [https://en.wikipedia.org/wiki/Switched-mode_power_supply switch-mode power supply] approach is favored. So far, a [https://en.wikipedia.org/wiki/Buck_converter Buck converter] is considered.

= Options =
I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220Ω resistor in series. turning on the PSU can be done with a SPDT switch, that is: ''on1 - on2.''
* red LED is between ''on1'' and purple (standby 5V)
* green LED is between grey (power OK) and ''on2'' (or GND, for that matter)
* green cable is soldered onto ''on2''
* middle point of the SPDT switch is on GND

this has the following consequences:
* when PSU is on mains and switched off, the red LED is on
* when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

I feel like wasting time, so here's some crappy ASCII art for this:

green-----------------
(grn) |
grey----R----|>|--o o--------ON2
| / ←{ this here is the SPDT switch }
GND---------------o--------o/
(red)
purple--R----|>|--------------ON1

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[https://www.distrelec.ch/c%C3%A2ble-alimentation-atx-20-cm-24p-nt-20p-mb/maxxtro/aa-150-0613/679017/informatique/fr 679017]
|24-pin (NT) – 20-pin (MB)
|12.-
|-
|Distrelec
||[https://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-gris-clair/ritel/24-15-001/100536/fr 100536]
|Laboratory socket light-gray ø 4 mm
|4.-
|-
|}

Power Supply with an ATX PSU

2012-01-30T22:54:08Z

Speredenn: /* Links */

[[Category:Ongoing_Projects]]

= Description =
Create a lab Power Supply from an [https://en.wikipedia.org/wiki/Power_Supply_Unit_%28Computer%29 ATX PSU].

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100538/fr 100538]
|Laboratory socket black ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100540/fr 100540]
|Laboratory socket red ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100546/fr 100546]
|Laboratory socket green ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100544/fr 100544]
|Laboratory socket yellow ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100542/fr 100542]
|Laboratory socket blue ø 4 mm
|4.-
|-
|}

= Price =
Depends of connectors number and of availability of an old working ATX PSU.

= Voltage =
* +5VDC
* +3.3VDC
* +12VDC
* -12VDC

= People involved =
*Fred
*Speredenn

= Links =
http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

http://www.instructables.com/id/How-To-Build-A-Power-Supply-For-Electronics-Hobby/

= Pictures =
[[File:PSU_1.JPG|200px]]
[[File:PSU_2.JPG|200px]]
[[File:PSU_3.JPG|200px]]
[[File:PSU_4.JPG|200px]]

= Update: PSU with regulate output =

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical. However, if the system uses a micro-controller (see Buck converter below), a digital screen could be an option. That would also be great to have a current limiter on that regulated output.

Linear regulators are excluded for this improvement because they dissipate way to much energy. A [https://en.wikipedia.org/wiki/Switched-mode_power_supply switch-mode power supply] approach is favored. So far, a [https://en.wikipedia.org/wiki/Buck_converter Buck converter] is considered.

= Options =
I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220Ω resistor in series. turning on the PSU can be done with a SPDT switch, that is: ''on1 - on2.''
* red LED is between ''on1'' and purple (standby 5V)
* green LED is between grey (power OK) and ''on2'' (or GND, for that matter)
* green cable is soldered onto ''on2''
* middle point of the SPDT switch is on GND

this has the following consequences:
* when PSU is on mains and switched off, the red LED is on
* when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

I feel like wasting time, so here's some crappy ASCII art for this:

green-----------------
(grn) |
grey----R----|>|--o o--------ON2
| / ←{ this here is the SPDT switch }
GND---------------o--------o/
(red)
purple--R----|>|--------------ON1

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[https://www.distrelec.ch/c%C3%A2ble-alimentation-atx-20-cm-24p-nt-20p-mb/maxxtro/aa-150-0613/679017/informatique/fr 679017]
|24-pin (NT) – 20-pin (MB)
|12.-
|-
|Distrelec
||[https://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-gris-clair/ritel/24-15-001/100536/fr 100536]
|Laboratory socket light-gray ø 4 mm
|4.-
|-
|}

Power Supply with an ATX PSU

2011-12-15T22:12:31Z

Speredenn:

[[Category:Ongoing_Projects]]

= Description =
Create a lab Power Supply from an [https://en.wikipedia.org/wiki/Power_Supply_Unit_%28Computer%29 ATX PSU].

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100538/fr 100538]
|Laboratory socket black ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100540/fr 100540]
|Laboratory socket red ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100546/fr 100546]
|Laboratory socket green ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100544/fr 100544]
|Laboratory socket yellow ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100542/fr 100542]
|Laboratory socket blue ø 4 mm
|4.-
|-
|}

= Price =
Depends of connectors number and of availability of an old working ATX PSU.

= Voltage =
* +5VDC
* +3.3VDC
* +12VDC
* -12VDC

= People involved =
*Fred
*Speredenn

= Links =
http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

= Pictures =
[[File:PSU_1.JPG|200px]]
[[File:PSU_2.JPG|200px]]
[[File:PSU_3.JPG|200px]]
[[File:PSU_4.JPG|200px]]

= Update: PSU with regulate output =

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical. However, if the system uses a micro-controller (see Buck converter below), a digital screen could be an option. That would also be great to have a current limiter on that regulated output.

Linear regulators are excluded for this improvement because they dissipate way to much energy. A [https://en.wikipedia.org/wiki/Switched-mode_power_supply switch-mode power supply] approach is favored. So far, a [https://en.wikipedia.org/wiki/Buck_converter Buck converter] is considered.

= Options =
I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220Ω resistor in series. turning on the PSU can be done with a SPDT switch, that is: ''on1 - on2.''
* red LED is between ''on1'' and purple (standby 5V)
* green LED is between grey (power OK) and ''on2'' (or GND, for that matter)
* green cable is soldered onto ''on2''
* middle point of the SPDT switch is on GND

this has the following consequences:
* when PSU is on mains and switched off, the red LED is on
* when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

I feel like wasting time, so here's some crappy ASCII art for this:

green-----------------
(grn) |
grey----R----|>|--o o--------ON2
| / ←{ this here is the SPDT switch }
GND---------------o--------o/
(red)
purple--R----|>|--------------ON1

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[https://www.distrelec.ch/c%C3%A2ble-alimentation-atx-20-cm-24p-nt-20p-mb/maxxtro/aa-150-0613/679017/informatique/fr 679017]
|24-pin (NT) – 20-pin (MB)
|12.-
|-
|Distrelec
||[https://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-gris-clair/ritel/24-15-001/100536/fr 100536]
|Laboratory socket light-gray ø 4 mm
|4.-
|-
|}

Power Supply with an ATX PSU

2011-12-15T22:06:42Z

Speredenn: /* Those interested */

[[Category:Ongoing_Projects]]

= Status =
On going...

= Description =
Create a lab Power Supply with an ATX PSU

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100538/fr 100538]
|Laboratory socket black ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100540/fr 100540]
|Laboratory socket red ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100546/fr 100546]
|Laboratory socket green ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100544/fr 100544]
|Laboratory socket yellow ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100542/fr 100542]
|Laboratory socket blue ø 4 mm
|4.-
|-
|}

= Price =
Depends of connectors number and of availability of an old working ATX PSU.

= Voltage =
* +5VDC
* +3.3VDC
* +12VDC
* -12VDC

= People involved =
*Fred
*Speredenn

= Links =
http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

= Pictures =
[[File:PSU_1.JPG|200px]]
[[File:PSU_2.JPG|200px]]
[[File:PSU_3.JPG|200px]]
[[File:PSU_4.JPG|200px]]

= Update: PSU with regulate output =

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical.

That would be great to have a current limiter on that regulated output also.
Linear regulators are excluded for this improvement because they dissipate way to much energy. A switch-mode power supply approach is favored <https://en.wikipedia.org/wiki/Switched-mode_power_supply>. So far, a Buck converter is considered : https://en.wikipedia.org/wiki/Buck_converter

= Options =
I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220Ω resistor in series. turning on the PSU can be done with a SPDT switch, that is: ''on1 - on2.''
* red LED is between ''on1'' and purple (standby 5V)
* green LED is between grey (power OK) and ''on2'' (or GND, for that matter)
* green cable is soldered onto ''on2''
* middle point of the SPDT switch is on GND

this has the following consequences:
* when PSU is on mains and switched off, the red LED is on
* when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

I feel like wasting time, so here's some crappy ASCII art for this:

green-----------------
(grn) |
grey----R----|>|--o o--------ON2
| / ←{ this here is the SPDT switch }
GND---------------o--------o/
(red)
purple--R----|>|--------------ON1

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[https://www.distrelec.ch/c%C3%A2ble-alimentation-atx-20-cm-24p-nt-20p-mb/maxxtro/aa-150-0613/679017/informatique/fr 679017]
|24-pin (NT) – 20-pin (MB)
|12.-
|-
|Distrelec
||[https://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-gris-clair/ritel/24-15-001/100536/fr 100536]
|Laboratory socket light-gray ø 4 mm
|4.-
|-
|}

Power Supply with an ATX PSU

2011-12-15T22:05:53Z

Speredenn: Buck converter improvement

[[Category:Ongoing_Projects]]

= Status =
On going...

= Description =
Create a lab Power Supply with an ATX PSU

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100538/fr 100538]
|Laboratory socket black ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100540/fr 100540]
|Laboratory socket red ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100546/fr 100546]
|Laboratory socket green ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100544/fr 100544]
|Laboratory socket yellow ø 4 mm
|4.-
|-
|Distrelec
||[http://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-noir/ritel/24-15-003/100542/fr 100542]
|Laboratory socket blue ø 4 mm
|4.-
|-
|}

= Price =
Depends of connectors number and of availability of an old working ATX PSU.

= Voltage =
* +5VDC
* +3.3VDC
* +12VDC
* -12VDC

= Those interested =
*Fred
*Speredenn

= Links =
http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

= Pictures =
[[File:PSU_1.JPG|200px]]
[[File:PSU_2.JPG|200px]]
[[File:PSU_3.JPG|200px]]
[[File:PSU_4.JPG|200px]]

= Update: PSU with regulate output =

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical.

That would be great to have a current limiter on that regulated output also.
Linear regulators are excluded for this improvement because they dissipate way to much energy. A switch-mode power supply approach is favored <https://en.wikipedia.org/wiki/Switched-mode_power_supply>. So far, a Buck converter is considered : https://en.wikipedia.org/wiki/Buck_converter

= Options =
I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220Ω resistor in series. turning on the PSU can be done with a SPDT switch, that is: ''on1 - on2.''
* red LED is between ''on1'' and purple (standby 5V)
* green LED is between grey (power OK) and ''on2'' (or GND, for that matter)
* green cable is soldered onto ''on2''
* middle point of the SPDT switch is on GND

this has the following consequences:
* when PSU is on mains and switched off, the red LED is on
* when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

I feel like wasting time, so here's some crappy ASCII art for this:

green-----------------
(grn) |
grey----R----|>|--o o--------ON2
| / ←{ this here is the SPDT switch }
GND---------------o--------o/
(red)
purple--R----|>|--------------ON1

= Components =

{| class="wikitable" style="text-align:left;"
|+
|-
! scope=col | Shop
! scope=col | Article N°
! scope=col | Description
! scope=col | Unit price (CHF)
|-
|Distrelec
|[https://www.distrelec.ch/c%C3%A2ble-alimentation-atx-20-cm-24p-nt-20p-mb/maxxtro/aa-150-0613/679017/informatique/fr 679017]
|24-pin (NT) – 20-pin (MB)
|12.-
|-
|Distrelec
||[https://www.distrelec.ch/borne-ronde-%C3%B8-4-mm-gris-clair/ritel/24-15-001/100536/fr 100536]
|Laboratory socket light-gray ø 4 mm
|4.-
|-
|}

ControlAcquisitionSystem

2011-12-15T22:00:11Z

Speredenn: /* Description */

[[Category:Proposed_Projects]]
Open control and acquisition system

= Description =
Create a control and acquisition system based on hardware platforms that we build. Ideally, there are two versions: a simpler one with a micro-controller-based architecture, and a more advanced one based on a micro-processor architecture (suited high-speed control, for example).

Goals:
* Developing a platform that can be used to control any physical setup we build.
* Have a measurement system that can acquire easily data from sensors.

Main features:
* Acquire data from test-rigs from a computer (usb link, if possible).
* Control the test-rig from a computer (usb link, if possible).
* Embedded control of a test-rig (without a computer behind).

= People involved =
* speredenn

ControlAcquisitionSystem

2011-12-15T21:58:58Z

Speredenn: Project init

[[Category:Proposed_Projects]]
Open control and acquisition system

= Description =
Create a control and acquisition system based on hardware platforms that we build. Ideally, there are two versions: a simple one with a microcontroller-based architecture, and one more advanced with a micro-processor (suited high-speed control, for example).

Goals:
* Developing a platform that can be used to control any physical setup we build.
* Have a measurement system that can acquire easily data from sensors.

Main features:
* Acquire data from test-rigs from a computer (usb link, if possible).
* Control the test-rig from a computer (usb link, if possible).
* Embedded control of a test-rig (without a computer behind).

= People involved =
* speredenn

Chargeur USB

2011-12-15T21:03:51Z

Speredenn: Add speredenn

[[Category:Proposed_Projects]]
USB charging station.

= Description =
Create a simple and handy USB charger for devices. It would consist of a sector adaptor and a USB hub. It would be nice to directly have mini, micro or type B connectors.
Goals:
* Charge battery
* Dock device (putting a magnet near the usb plug)
* USB hub
* USB monitoring (debug, dump)

= Matériel =
* [https://www.distrelec.ch/connecteur-de-c%C3%A2ble-femelle-%C3%A0-souder-scr-10p/3m/36210-0100fd/128328/fr USB Type A sockets]
* USB Type A to Type B/Mini/Micro short adaptor or connector
* A case

= Personnes intéressées =
* JB
* speredenn

Power Supply with an ATX PSU

2011-10-19T21:08:42Z

Speredenn: Update of the project Fred's ideas.

RwthCTF 2011

2011-09-23T21:38:00Z

Speredenn: fancy box

= First Contact =

'''Email'''

<div style="background-color: #ddf5eb; border-style: dotted;">
Hi rwthCTF Teams,

with this message, the first ever rwthCTF is officially in the "team-preparation" phase. Attached to this mail you can find the first instructional README.txt file, a rough diagram of our network setup and a second document (codewars.txt) that serves as a small appetizer for the upcoming challenges in the CTF. The appetizer (codewars documentation) only describes a small part of the CTF event - we will have lots of programming languages and skill areas covered. Also the scripts mentioned in the document will only be made available when the competition starts.

Additionally we prepared a "test-vulnbox" that can be downloaded from the link below. This is _NOT_ the final vulnbox image. Please refer to the README for further pointers. You will need this once VPN credentials are released - probably on next Monday (again see README).

This E-Mail is signed with a PGP key and sent in PGP/MIME. Please download the corresponding public key from http://ctf.itsec.rwth-aachen.de/ and verify the signature. All further mail communication from rwthCTF organizers will be signed with this key as well.

Cheers,

rwthCTF Orga

Test-Vulnbox: xxxxxxx

GPG-symmetric-passphrase: xxxxxxx
</div>

'''Attachments: ''' [[File:README.txt]] [[File:codewars.txt]]

[[File:network.png|450px]]

RwthCTF 2011

2011-09-23T21:32:52Z

Speredenn: mise en page

= First Contact =

'''Email'''

<code>
Hi rwthCTF Teams,

with this message, the first ever rwthCTF is officially in the "team-preparation" phase. Attached to this mail you can find the first instructional README.txt file, a rough diagram of our network setup and a second document (codewars.txt) that serves as a small appetizer for the upcoming challenges in the CTF. The appetizer (codewars documentation) only describes a small part of the CTF event - we will have lots of programming languages and skill areas covered. Also the scripts mentioned in the document will only be made available when the competition starts.

Additionally we prepared a "test-vulnbox" that can be downloaded from the link below. This is _NOT_ the final vulnbox image. Please refer to the README for further pointers. You will need this once VPN credentials are released - probably on next Monday (again see README).

This E-Mail is signed with a PGP key and sent in PGP/MIME. Please download the corresponding public key from http://ctf.itsec.rwth-aachen.de/ and verify the signature. All further mail communication from rwthCTF organizers will be signed with this key as well.

Cheers,

rwthCTF Orga

Test-Vulnbox: xxxxxxx

GPG-symmetric-passphrase: xxxxxxx
</code>

'''Attachments: ''' [[File:README.txt]] [[File:codewars.txt]]

[[File:network.png|450px]]

RwthCTF 2011

2011-09-23T21:31:32Z

Speredenn: <pre> -> <code>

= First Contact =

'''Email'''

<code>
Hi rwthCTF Teams,

with this message, the first ever rwthCTF is officially in the "team-preparation" phase. Attached to this mail you can find the first instructional README.txt file, a rough diagram of our network setup and a second document (codewars.txt) that serves as a small appetizer for the upcoming challenges in the CTF. The appetizer (codewars documentation) only describes a small part of the CTF event - we will have lots of programming languages and skill areas covered. Also the scripts mentioned in the document will only be made available when the competition starts.

Additionally we prepared a "test-vulnbox" that can be downloaded from the link below. This is _NOT_ the final vulnbox image. Please refer to the README for further pointers. You will need this once VPN credentials are released - probably on next Monday (again see README).

This E-Mail is signed with a PGP key and sent in PGP/MIME. Please download the corresponding public key from http://ctf.itsec.rwth-aachen.de/ and verify the signature. All further mail communication from rwthCTF organizers will be signed with this key as well.

Cheers,

rwthCTF Orga

Test-Vulnbox: xxxxxxx

GPG-symmetric-passphrase: xxxxxxx
</code>
'''Attachments: ''' [[File:README.txt]] [[File:codewars.txt]]

[[File:network.png|450px]]