== Setup ==
# Download [http://downloads.raspberrypi.org/NOOBS_lite_latest NOOBS], a simple to use installer that requires no command line knowledge
# Find an empty [http://elinux.org/RPi_SD_cards SD or microSD ] card (minimum 2gb/class 6, 4gb/class 10 recommended - try to find cards with UHS-1), make sure it's FAT32, and then extract all the files from the NOOBS zip onto it
# Plug in the SD card, an HDMI or composite display, a ethernet cable, usb keyboard + mouse, and a ''good'' 5v power supply (seriously - a lot of issues come from low power/fake power supplies) [[File:RasperrySetup.jpg|500px]]
# Power on the Pi, and wait a few seconds until you reach the screen below. Select Raspbian, click install, and wait a few minutes - the Pi should take 20-60 minutes to install depending on your internet connection and SD card. [[File:NOOBS.png|500px]]
# Click on finish, reboot your Pi, and you're good to go!
<pre>
Hackers guide, only do this if you know what you're doing - you could wipe the wrong device!
sync
##remove SD card and copy steps 3 and 5 above
## Configuration tool with menus / Outil de configuration par menu :
raspi-config
## Ddefault user / Utilisateur par défaut : pi
</pre>
=== WiFi ===
If you have a WiFi stick that is directly compatible with Raspbian, follow the instructions bellow. If it's not, then you'll need to troubleshoot with Google.
[http://www.debuntu.org/how-to-wifi-roaming-with-wpa-supplicant/ WPA supplicant setup] with different settings for different networks
=== Headless setup ===
If you don't want to connect a keyboard and monitor to your RPi, you can perform a [[Raspberry Pi: Headless installation|headless installation of Raspbian]] instead of using NOOBS.
== Screen blanking ==
add the following lines to /etc/xdg/lxsession/LXDE/autostart, remove the line with the screensaver option
@xset s off
@xset -dpms
@xset s noblank
== Software ==
Then you can edit files in /var/www/
=== Un wiki Wiki ===
==== Intro ====
Utiliser un Raspberry Pi pour remplacer un serveur AMD 64 bit est ce réaliste pour héberger un wiki?
Biensur on est bien loin de Mediawiki ou de MoinsMoins.
Then you can edit files in on your laptop. === Push notifications ===You can send push notifications with Pushbulltet on various events, such as booting your Pi. Let's start off with a script that sends you a push notification with your IP when you turn on your Pi: nano piip.shPaste this inside, and replace the example keys with your own keys: #!/bin/bash ipVar=$(/sbin/ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}') curl https://api.pushbullet.com/v2/pushes \ -u <paste_your_API_key_here>: \ -d device_iden="<device_ID_of_your_phone>" \ -d type="note" \ -d title="Pi IP address" \ -d body=$ipVar \ -X POST Set permissions to allow it to execute: sudo chmod 777 piip.sh Open the crontab: sudo crontab -e Then paste at the bottom of the crontab: @reboot /home/pi/piip.sh [https:/var/www.raspberrypi.org/forums/viewtopic.php?f=66&t=79151 Documentation]
== Hardware ==
[https://projects.drogon.net/raspberry-pi/wiringpi/the-gpio-utility/ Documentation]
[https://github.com/sarfata/pi-blaster PWM library]