Difference between revisions of "Proxmark3"
From Fixme.ch
(→Compiling the P3 suite) |
(→Flash the Proxmark using a BusPirate) |
||
Line 6: | Line 6: | ||
* Get OpenOCD http://sourceforge.net/projects/openocd/files/openocd/ | * Get OpenOCD http://sourceforge.net/projects/openocd/files/openocd/ | ||
* Compile OpenOCD for the BusPirate | * Compile OpenOCD for the BusPirate | ||
− | ./configure --enable-buspirate | + | ./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared |
make && sudo make install | make && sudo make install | ||
Revision as of 16:03, 27 March 2014
Information
Flash the Proxmark using a BusPirate
- Get OpenOCD http://sourceforge.net/projects/openocd/files/openocd/
- Compile OpenOCD for the BusPirate
./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared make && sudo make install
Proxmark 3 client
- Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl chmod devkit.pl ./devkit.pl export DEVKITPRO=~/devkitPro export DEVKITARM=${DEVKITPRO}/devkitARM export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only cd proxmark3-read-only make
- Plug the Proxmark
./client/proxmark3
- Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare