-- connection --== Information ==* Wikipedia : http://en.wikipedia.org/wiki/Bus_Pirate* Bus pirate 3.6: http://dangerousprototypes.com/docs/Bus_Pirate == Connection ==1) # do a dmesg to find which tty the bus pirate is connected to2) do a screen /dev/buspirate 115200 8N1- hint: # check if you have the write and read right on the tty before you connect to it3) # do a screen /dev/buspirate 115200 8N1# you will be prompt with a nice prompt.# If you still don't have a prompt, type enter, you will have a shell. == logic sniffer ==You can use the bus pirate as a logic sniffer. I would recommand using the Open bench logic for this. You can use this tutorial :http://dangerousprototypes.com/2012/02/12/sniffing-spi-data-with-bus-pirate/Which is designed by the bus pirate constructor to sniff dataNote that this can be used only up to 5 input. == See Also ==* [[Proxmark3]]