Difference between revisions of "Arduino CLI"
From Fixme.ch
(→Makefile) |
|||
| Line 1: | Line 1: | ||
| − | == | + | == Use the arduino from the command line, to compile and upload == |
* Install this: | * Install this: | ||
apt-get install arduino-mk avr-gcc avr-libc | apt-get install arduino-mk avr-gcc avr-libc | ||
| − | * | + | * Put this in a Makefile |
ARDUINO_DIR = /usr/share/arduino | ARDUINO_DIR = /usr/share/arduino | ||
BOARD_TAG = atmega328 | BOARD_TAG = atmega328 | ||
Latest revision as of 20:41, 15 January 2013
Use the arduino from the command line, to compile and upload
- Install this:
apt-get install arduino-mk avr-gcc avr-libc
- Put this in a Makefile
ARDUINO_DIR = /usr/share/arduino BOARD_TAG = atmega328 ARDUINO_PORT = /dev/ttyUSB* ARDUINO_LIBS = NewPing OtherLibs include /usr/share/arduino/Arduino.mk
- Choose the BOARD_TAG using this command:
ard-parse-boards --boards
- Commands
make - no upload make upload - compile and upload make clean - remove all our dependencies make depends - update dependencies make reset - reset the Arduino by tickling DTR on the serial port make raw_upload - upload without first resetting make show_boards - list all the boards defined in boards.txt
