Difference between revisions of "Arduino CLI"
From Fixme.ch
(Created page with "== Makefile == * Install this: apt-get install arduino-mk avr-gcc avr-libc * Use the arduino from the command line, to compile and upload ARDUINO_DIR = /usr/share/arduino BOARD_...") |
|||
| Line 3: | Line 3: | ||
apt-get install arduino-mk avr-gcc avr-libc | apt-get install arduino-mk avr-gcc avr-libc | ||
* Use the arduino from the command line, to compile and upload | * Use the arduino from the command line, to compile and upload | ||
| − | ARDUINO_DIR = /usr/share/arduino | + | ARDUINO_DIR = /usr/share/arduino |
| − | BOARD_TAG = atmega328 | + | BOARD_TAG = atmega328 |
| − | ARDUINO_PORT = /dev/ttyUSB* | + | ARDUINO_PORT = /dev/ttyUSB* |
| − | ARDUINO_LIBS = NewPing OtherLibs | + | ARDUINO_LIBS = NewPing OtherLibs |
| − | include /usr/share/arduino/Arduino.mk | + | include /usr/share/arduino/Arduino.mk |
* Choose the BOARD_TAG using this command: | * Choose the BOARD_TAG using this command: | ||
ard-parse-boards --boards | ard-parse-boards --boards | ||
Revision as of 20:40, 15 January 2013
Makefile
- Install this:
apt-get install arduino-mk avr-gcc avr-libc
- Use the arduino from the command line, to compile and upload
ARDUINO_DIR = /usr/share/arduino BOARD_TAG = atmega328 ARDUINO_PORT = /dev/ttyUSB* ARDUINO_LIBS = NewPing OtherLibs include /usr/share/arduino/Arduino.mk
- Choose the BOARD_TAG using this command:
ard-parse-boards --boards
- Commands
make - no upload make upload - compile and upload make clean - remove all our dependencies make depends - update dependencies make reset - reset the Arduino by tickling DTR on the serial port make raw_upload - upload without first resetting make show_boards - list all the boards defined in boards.txt
