Difference between revisions of "Proxmark3"
From Fixme.ch
Line 5: | Line 5: | ||
== Flash the Proxmark using a BusPirate == | == Flash the Proxmark using a BusPirate == | ||
− | * Get OpenOCD | + | * Get OpenOCD and compile it for the BusPirate |
− | + | git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd | |
+ | cd openocd | ||
./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared | ./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared | ||
make && sudo make install | make && sudo make install | ||
Line 14: | Line 15: | ||
wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg | wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg | ||
openocd -f at91sam7s512-buspirate.cfg | openocd -f at91sam7s512-buspirate.cfg | ||
+ | nc localhost 4444 | ||
== Proxmark 3 client == | == Proxmark 3 client == | ||
Line 33: | Line 35: | ||
./client/proxmark3 | ./client/proxmark3 | ||
* Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare | * Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare | ||
+ | |||
+ | == See Also == | ||
+ | * [[Bus_pirate]] |
Revision as of 16:10, 27 March 2014
Information
Flash the Proxmark using a BusPirate
- Get OpenOCD and compile it for the BusPirate
git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd cd openocd ./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared make && sudo make install
- Wire the BusPirate to the Proxmark3
TODO FIXME PTDR
- Connect to the bus pirate
wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg openocd -f at91sam7s512-buspirate.cfg nc localhost 4444
Proxmark 3 client
- Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl chmod devkit.pl ./devkit.pl export DEVKITPRO=~/devkitPro export DEVKITARM=${DEVKITPRO}/devkitARM export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only cd proxmark3-read-only make
- Plug the Proxmark
./client/proxmark3
- Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare