Difference between revisions of "Nighthawk250"
From Fixme.ch
(→Batteries) |
|||
| Line 1: | Line 1: | ||
* Building a FPV Drone: [http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863 HobbyKing Spec Class 250fpv] | * Building a FPV Drone: [http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863 HobbyKing Spec Class 250fpv] | ||
| − | == Frame == | + | == Current setup == |
| + | * Motor: http://hobbyking.com/hobbyking/store/__66424__Turnigy_Multistar_1704_2300Kv_12_Pole_Multi_Rotor_Outrunner_V2.html?strSearch=multistar%201704 | ||
| + | * FCU: CC3D Atom | ||
| + | * Batteries | ||
| + | ** 11.1V 3S 1800mAh 20C | ||
| + | ** 11.1V 3S 1000mAh XXC | ||
| + | ** 14.8V 4S 1800mAh 25C (non usable with these motors) | ||
| + | |||
| + | == Assembly == | ||
| + | === Frame === | ||
* Basic assembly guide: https://www.youtube.com/watch?v=r8ALzUluyXM | * Basic assembly guide: https://www.youtube.com/watch?v=r8ALzUluyXM | ||
| − | == Configure FCU: CC3D Atom == | + | === Configure FCU: CC3D Atom === |
* Install OpenPilot GCS in an Ubuntu 15.04 chroot https://wiki.openpilot.org/display/WIKI/Downloading+and+Installing+the+Ground+Control+Station | * Install OpenPilot GCS in an Ubuntu 15.04 chroot https://wiki.openpilot.org/display/WIKI/Downloading+and+Installing+the+Ground+Control+Station | ||
* Hardware setup: https://wiki.openpilot.org/display/WIKI/CopterControl+-+CC3D+-+Atom+Hardware+Setup | * Hardware setup: https://wiki.openpilot.org/display/WIKI/CopterControl+-+CC3D+-+Atom+Hardware+Setup | ||
* Full introduction to building a quad with the CC3D https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh | * Full introduction to building a quad with the CC3D https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh | ||
| − | == Batteries == | + | === Batteries === |
* https://www.reddit.com/r/Multicopter/wiki/power | * https://www.reddit.com/r/Multicopter/wiki/power | ||
* C rating : the higher, the higher current you can draw http://www.rcheliwiki.com/C_rating | * C rating : the higher, the higher current you can draw http://www.rcheliwiki.com/C_rating | ||
Revision as of 22:21, 19 July 2015
- Building a FPV Drone: HobbyKing Spec Class 250fpv
Contents
Current setup
- Motor: http://hobbyking.com/hobbyking/store/__66424__Turnigy_Multistar_1704_2300Kv_12_Pole_Multi_Rotor_Outrunner_V2.html?strSearch=multistar%201704
- FCU: CC3D Atom
- Batteries
- 11.1V 3S 1800mAh 20C
- 11.1V 3S 1000mAh XXC
- 14.8V 4S 1800mAh 25C (non usable with these motors)
Assembly
Frame
- Basic assembly guide: https://www.youtube.com/watch?v=r8ALzUluyXM
Configure FCU: CC3D Atom
- Install OpenPilot GCS in an Ubuntu 15.04 chroot https://wiki.openpilot.org/display/WIKI/Downloading+and+Installing+the+Ground+Control+Station
- Hardware setup: https://wiki.openpilot.org/display/WIKI/CopterControl+-+CC3D+-+Atom+Hardware+Setup
- Full introduction to building a quad with the CC3D https://www.youtube.com/playlist?list=PLYsWjANuAm4r-E61stLchCR4bzY3NmDNh
Batteries
- https://www.reddit.com/r/Multicopter/wiki/power
- C rating : the higher, the higher current you can draw http://www.rcheliwiki.com/C_rating
- S is the number of cells, and is representing the tension (1S=3.7V, 2S=7.4, 3S=11.1V, ...)
- Balancing: Cells need to be a the same charge level so we can avoid overcharging.
- It's a good idea to always use the balance mode to charge a multiple cells battery
- http://www.rcheliwiki.com/Balance_charger
- Use the charger to check and rebalance cells https://www.youtube.com/watch?v=AChoy_PsVEg
Gallery
- 1st flight https://www.youtube.com/watch?v=RCSfAMZ6bm0
- FPV Camera setup https://www.youtube.com/watch?v=aNmkK1-EYYc
