Difference between revisions of "Proxmark3"
From Fixme.ch
(→Flash the Proxmark using a BusPirate) |
(→Flash the Proxmark using a BusPirate) |
||
Line 8: | Line 8: | ||
./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared | ./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared | ||
make && sudo make install | make && sudo make install | ||
+ | * Wire the BusPirate to the Proxmark3 | ||
+ | TODO FIXME PTDR | ||
+ | * Connect to the bus pirate | ||
+ | wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg | ||
+ | openocd -f at91sam7s512-buspirate.cfg | ||
== Proxmark 3 client == | == Proxmark 3 client == |
Revision as of 16:06, 27 March 2014
Information
Flash the Proxmark using a BusPirate
- Get OpenOCD http://sourceforge.net/projects/openocd/files/openocd/
- Compile OpenOCD for the BusPirate
./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared make && sudo make install
- Wire the BusPirate to the Proxmark3
TODO FIXME PTDR
- Connect to the bus pirate
wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg openocd -f at91sam7s512-buspirate.cfg
Proxmark 3 client
- Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl chmod devkit.pl ./devkit.pl export DEVKITPRO=~/devkitPro export DEVKITARM=${DEVKITPRO}/devkitARM export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only cd proxmark3-read-only make
- Plug the Proxmark
./client/proxmark3
- Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare