Difference between revisions of "Proxmark3"
From Fixme.ch
(→Flash the Proxmark using a BusPirate) |
(→Flash the Proxmark using a BusPirate) |
||
Line 13: | Line 13: | ||
* Wire the BusPirate to the Proxmark3 | * Wire the BusPirate to the Proxmark3 | ||
** Connect GND, TDO, TMS, TDI, TCK using these pinouts, respectively p3 and buspirate | ** Connect GND, TDO, TMS, TDI, TCK using these pinouts, respectively p3 and buspirate | ||
− | [[Image:Ulink_arm20pin_proxmark.gif]] | + | [[Image:Ulink_arm20pin_proxmark.gif|x200px]] |
− | [[Image:buspirate_serial_pinout_connections_by_sparkfun-800x392.png]] | + | [[Image:buspirate_serial_pinout_connections_by_sparkfun-800x392.png|x200px]] |
* Connect to the bus pirate | * Connect to the bus pirate | ||
wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg | wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg |
Revision as of 16:22, 27 March 2014
Information
Flash the Proxmark using a BusPirate
- Get OpenOCD and compile it for the BusPirate
git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd cd openocd ./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared make && sudo make install
- Build the proxmark roms (bootrom and fullimage), see below
- Wire the BusPirate to the Proxmark3
- Connect GND, TDO, TMS, TDI, TCK using these pinouts, respectively p3 and buspirate
- Connect to the bus pirate
wget https://raw.githubusercontent.com/hewittc/proxmark3lcd/master/tools/at91sam7s512-buspirate.cfg openocd -f at91sam7s512-buspirate.cfg
- Connect and flash
nc localhost 4444 > halt > flash erase_sector 0 0 15 > flash erase_sector 1 0 15 > flash write_image ../armsrc/obj/fullimage.elf > flash write_image ../bootrom/obj/bootrom.elf
Proxmark 3 client
- Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl chmod devkit.pl ./devkit.pl export DEVKITPRO=~/devkitPro export DEVKITARM=${DEVKITPRO}/devkitARM export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only cd proxmark3-read-only make
- Plug the Proxmark
./client/proxmark3
- Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare