Difference between revisions of "Extension Explorer 16"

From Fixme.ch
Jump to: navigation, search
(→‎Layout)
Line 114: Line 114:
 
= Layout =
 
= Layout =
 
[[File:PCB Cross fire Ext16.JPG|800px|alt=PCB - Extension Explorer 16 (cross fire)|PCB Feux Tricolores]]
 
[[File:PCB Cross fire Ext16.JPG|800px|alt=PCB - Extension Explorer 16 (cross fire)|PCB Feux Tricolores]]
−
[[File:New Version PCB V2.jpg|200px|thumb|right|H2 / Cross Light - Layout - Kicad]]
+
 
−
[[File:Routage CrossFire Board.jpg|200px|thumb|right|H2 / Cross Light - Layout - Orcad]]
+
[[File:New Version PCB V2.jpg|200px|thumb|right|H1 / Cross Light - Layout - Kicad]]
 +
 
 +
[[File:Routage CrossFire Board.jpg|200px|thumb|right|H1 / Cross Light - Layout - Orcad]]
  
 
= BOM - Bill of Material =
 
= BOM - Bill of Material =

Revision as of 12:27, 22 June 2015

Description

In French: Création d'une carte d'extension pour la carte Explorer (PROJET: Carte Explorer 16 & Exos sur les uC).

  • V1: un montage permettra de simuler un carrefour routier, composer de 4 feux (RGB)


in English: creation of one extansion board for the Explorer Board (see the links above)

  • V1: assembly will allow to simulate a crossroad (4 fires (RGB))

Digram - Schematic

H1 - Orcad
H2 / Cross Light - Orcad

Cross Light Part

schema de la partie Feux tricolores

Part Calculation of Electronics Digram

LED's for crossroad

  • the datasheet of the DSP implemented on the Explorer Board 16 (see pages 1 & 273) indicates that :
    • output current of I/O : I = 10mA
    • voltage I/O : VDD = 3.3V
  • the datasheet of the red LED (see pages 3) indicates that :
    • conduction voltage : ULR = VF = 1.8V
    • average current : I = 20mA
  • the datasheet of the orange LED (see pages 3 / 4 / 5) indicates that :
    • conduction voltage : ULO = VF = 1.9V
    • average current : I = 30mA
  • the datasheet of the green LED (see pages 3 / 4 / 5) indicates that :
    • conduction voltage : ULG = VF = 2.2V
    • average current : I = 30mA

Formula

  • calculation of resistance R_LED_R :

R_{LED_R}=\frac{U_r}{I}=\frac{V_{DD}-U_{LR}}{I}=\frac{3.3V-1.8V}{10mA} = 150 ohm

  • power dispersed by the resistance P_R_LED_R :

P_{R_{LED_R}}=\frac{R_{LED_R}^2}{I}=\frac{150^{2}}{10mA} = 15 mW

  • calculation of resistance R_LED_O :

R_{LED_O}=\frac{U_r}{I}=\frac{V_{DD}-U_{LO}}{I}=\frac{3.3V-1.9V}{10mA} = 140 ohm

  • power dispersed by the resistance P_R_LED_O :

P_{R_{LED_O}}=\frac{R_{LED_O}^2}{I}=\frac{140^{2}}{10mA} = 14 mW

  • calculation of resistance R_LED_G :

R_{LED_G}=\frac{U_r}{I}=\frac{V_{DD} - U_{LG}}{I}=\frac{3.3V-2.2V}{10mA} = 110 ohm

  • power dispersed by the resistance P_R_LED_G :

P_{R_{LED_G}}=\frac{R_{LED_G}^2}{I}=\frac{110^{2}}{10mA} = 11 mW

Switch for crossroad

  • the datasheet of the DSP implemented on the Explorer Board 16 (see pages 1, 278, 279) indicates that :
    • output current of I/O : I_output = 10mA
    • input current of I/O : I_output max = 5mA
    • voltage I/O : VDD = 3.3V
    • leakage current of I/O : 2uA
    • low state ('0') in voltage : 0,2 * VDD

Formula

  • voltage seens by the input of uC when it's a low state VDD_low :

VDD_{low} = VDD \cdot 0.2 = 3.3 \cdot 0.2 = 0.66 V

  • Resitor seens by the input of uC when it's a low state RIN_low :

RIN_{low} = \frac{VDD_{low}}{I_L} = \frac{0.66}{2u} = 330 kohms

  • Resitor Pull-Up MAX :

R_{Pull-Up_{max}} = \frac{VDD - VDD_{low}}{I_L} = \frac{3.3 - 0.66}{2u} = 1.32 Mohms

Remark : the resistor must be more less that the R_PULL-UP_max - usually, the value of 10kohm is using for the resistor pull-up.

  • Current using when the switch is closed

I_{R_{Pull-Up}} = \frac{VDD - VDD_{low}}{R_{Pull-up}} = \frac{3.3 - 0.66}{10k} = 264 uA

  • power dispersed by the resistance push-pull when the switch is actived

P_{R_{Pull-Up}} = (VDD - VDD_{low}) \cdot I_{R_{Pull-Up}} = (3.3V - 0.66V)\cdot 262uA = 696.96 uW

Layout

PCB - Extension Explorer 16 (cross fire)

H1 / Cross Light - Layout - Kicad
H1 / Cross Light - Layout - Orcad

BOM - Bill of Material

BOM for the Feux Tricolor
Designation Nb de composants Fournisseur Référence Prix
Led Rouge 5mm 4 Farnell 2112111 0.307 CHFrs /pieces
Led Rouge SMD (option) 4 Farnell 8554641 0.0982 CHFrs /5pieces
Led Orange 5mm 4 Farnell 1003212 0.257 CHFrs /pieces
Led Orange SMD (option) 4 Farnell 8554552 0.537 CHFrs /5pieces
Led Verte 5mm 4 Farnell 2217954 0.368 CHFrs /pieces
Led Verte SMD (option) 4 Farnell 8554609 0.326 CHFrs /5pieces
Resistance SMD 110 ohm 100mW 4 Farnell 2351021 0.01 CHFrs /pieces
Resistance SMD 140 ohm 100mW 4 Farnell 2351049 0.01 CHFrs /pieces
Resistance SMD 150 ohm 100mW 4 Farnell 9332596 0.0734 CHFrs / 50pieces
Resistance SMD 10kohm 100mW 4 Farnell 9332391 0.082 CHFrs / 50pieces
Commutateur Tactile 1 Farnell 1555985 0.155 CHFrs /pieces
Connecteur 120pin 1 Digikey MEC1-160-02-S-D-A or MEC1-160-02-F-DEM2 9.3 $/pieces

Assembly

montage de la partie Cross Fire

Tests

test de la partie Cross Fire test de la partie Cross Fire

Modification

Documentation

PDF FILE

required links

Contributor

Retrieved from "https://fixme.ch/w/index.php?title=Extension_Explorer_16&oldid=6973"