SDR

From Fixme.ch
Revision as of 22:06, 24 June 2013 by Freestorm (Talk | contribs)

Jump to: navigation, search

Quickstart

We currently have two rtl_tcp instances running at FIXME:

  • sdr1.fixme.ch:1234 (62.220.135.211:1234) (Raspberry PI, west window, MC's homemade VHF antenna)
  • foo.fixme.ch:1234 (FIXME's internal server, north window, original UHF antenna)

Service

  • The service is started with the following command is listen to the port 1234
sv start rtl-tcp

GNURadio

 mkdir gnuradio; cd gnuradio
 wget http://www.sbrac.org/files/build-gnuradio; chmod a+x ./build-gnuradio; ./build-gnuradio
  • On Debian 7: apt-get install gnuradio (???)
  • On arch linux, a working package is in aur so you only need
 yaourt -S gnuradio
  • Install and use Multimode
 svn co https://www.cgran.org/svn/projects/multimode/trunk/ gnuradio-multimode
 git clone git://git.osmocom.org/osmo-sdr.git
 ./multimode.py --devinfo=rtl_tcp=foo.fixme.ch:1234 --freq=98.5M --dmode=WFM --mthresh=-35 --vol=10

SDR#

  • Replace $ARCH by i386 or x86_64
ARCH='x86_64'
sudo apt-get install mono-complete monodevelop
sudo apt-get install libportaudio2 
sudo apt-get install subversion
svn co https://subversion.assembla.com/svn/sdrsharp/trunk sdrsharp
cd sdrsharp
xbuild /t:Rebuild /p:Configuration=Release SDRSharp.sln /p:Platform=x86
cd Release
sudo ln -s /usr/local/lib/librtlsdr.so librtlsdr.dll
sudo ln -s /usr/lib/$ARCH-linux-gnu/libportaudio.so.2 libportaudio.so
mono SDRSharp.exe


To prevent the error below, just modify the file release/SDRSharp.exe.config and comment the line as follow: 

<!-- <add key="SDR-IQ" value="SDRSharp.SDRIQ.SdrIqIO,SDRSharp.SDRIQ" /> -->^M

Sdsharp error.jpg


The gui

Sdsharp.jpg


References


Multimon-NG

git clone https://github.com/EliasOenal/multimonNG.git
cd multimonNG
mkdir build
cd build
qmake ../multimon-ng.pro
make
sudo make install

On arch linux, you have the choice between a "stable" version named multimon 

 yaourt -S multimon

and The dev version 

 yaourt -S multimon-ng-git

Goal

  • Install an SDR reception station at FIXME based on rtl-sdr, a DVB-T USB Stick and a Raspberry Pi.

References

HOWTO

pi@sdr1 ~ $ rtl_tcp -a 0.0.0.0
Found 1 device(s).
Found Fitipower FC0013 tuner
Using Terratec NOXON DAB/DAB+ USB dongle (rev 1)
Tuned to 100000000 Hz.
listening...
Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).

Participants

Retrieved from "https://fixme.ch/w/index.php?title=SDR&oldid=4456"