Power Supply with an ATX PSU

Status

On going...

Description

Create a lab Power Supply with an ATX PSU

Components

Shop	Article N°	Description	Unit price (CHF)
Distrelec	100538	Laboratory socket black ø 4 mm	4.-
Distrelec	100540	Laboratory socket red ø 4 mm	4.-
Distrelec	100546	Laboratory socket green ø 4 mm	4.-
Distrelec	100544	Laboratory socket yellow ø 4 mm	4.-
Distrelec	100542	Laboratory socket blue ø 4 mm	4.-

Price

Depends of connectors number and of availability of an old working ATX PSU.

Voltage

• +5VDC
• +3.3VDC
• +12VDC
• -12VDC

Those interested

• Fred
• Speredenn

Links

http://www.semageek.com/diy-transformer-une-alimentation-atx-en-alimentation-de-laboratoire/

http://pinouts.ru/Power/atxpower_pinout.shtml

http://www.sinux.net/2011/09/alim-atx.html

Pictures

Update: PSU with regulate output

It is a better idea to have the ATX set up in a box and to use the ATX connector to connect to the banana plugs. Basically, it is then possible to have the 5 usual plugs (GND, +3.3, +5, +12, -12) and add a regulated output (0-12V). The visualization for that regulated output can be analogical.

That would be great to have a current limiter on that regulated output also.

It might be possible to use a LM317 for the voltage control.

Options

I suppose it is good to have at least 2 LEDs, a red and a green, each with a 220R in series. turning on the PSU can be done with a SPDT switch, that is: on1 - on2.

• red LED is between on1 and purple (standby 5V)
• green LED is between on2 and grey (power OK)
• green cable is soldered onto on2
• middle point of the SPDT switch is on GND

this has the following consequences:

• when PSU is on mains and switched off, the red LED is on
• when flipping the switch, PSU turns on ; after about a second the green LED lights, indicating all is good.

Components

Shop	Article N°	Description	Unit price (CHF)
Distrelec	679017	24-pin (NT) – 20-pin (MB)	12.-
Distrelec	100536	Laboratory socket light-gray ø 4 mm	4.-