Difference between revisions of "ARM Board"
From Fixme.ch
| Line 48: | Line 48: | ||
In beta state. Version 1 boards have been fabbed and need to be | In beta state. Version 1 boards have been fabbed and need to be | ||
tested and assembled | tested and assembled | ||
| + | |||
| + | Errata/changes required for next version: | ||
| + | * probably a problem with 3.3V circuit operation and battery: PMOS gate only gets pulled up to 3.3V, but likely needs the full battery voltage | ||
=== Toolchain === | === Toolchain === | ||
Revision as of 22:44, 25 September 2011
Contents
Overview
The goal is to have a small, cheap, and powerful development board that supports USB for easy programming, at low parts costs (current estimate < $5). This allows us to use the board for all silly purposes where spending >$20 for an Arduino is just too much. The board is like the Teensy, just with an ARM microcontroller instead.
Quick links
- Project sources
- NUC homepage
- Reference Manual
- ARMv6 Architecture Manual (requires registration)
Detailed Description
The board uses a Nuvoton NUC120 48-pin microcontroller which has an ARM Cortex-M0 CPU 32-bit CPU core.
Features:
- up to 50MHz
- 32KKB-128KKB program flash, 4KKB-16KKB RAM, 4KKB data flash, 4KKB boot loader flash
- 2 UART, 1 SPI, 2 I2C, USB, 1 analog comparator, 4 PWM, 8 12-bit ADC channels
The board contains:
- USB A connector on board outline
- optional Mini-USB receptacle
- USB header connector for direct wire connections (e.g. inside PC)
- optional voltage regulator for external voltage (up to 13V)
- optional LiPo battery charger IC for battery operation
- LiPo charger can be driven from a solar panel
- SWD debug/programming header
- reset button
- 1 LED for binary debug/information display
Project roadmap
Hardware design
In beta state. Version 1 boards have been fabbed and need to be tested and assembled
Errata/changes required for next version:
- probably a problem with 3.3V circuit operation and battery: PMOS gate only gets pulled up to 3.3V, but likely needs the full battery voltage
Toolchain
Proprietary windows software is available, but we'd like to have complete support with free software tools.
What works
- gcc/binutils/gdb support ARM Cortex-M0
What needs work
- Programming/Debugging: OpenOCD supposedly supports SWD. Needs to be confirmed what works.
- Need bootloader and programming software. Proprietary from Nuvoton available
- Tool library?
Programming envionment
- Maple IDE by LeafLabs is a port of the Arduino IDE for ARM
- LeafLabs command-line toolchain might apply in parts, or at least inspire
- summon arm toolchain builds an ARM toolchain
Example projects
- Your idea here
