Difference between revisions of "Atelier machines / UCmakerspace"

From Fixme.ch
Jump to: navigation, search
(Created page with "The atelier is still being set up. The general concept is that we can't use machines without colonelmoutarde's supervision. If you want to bring new machines, you have to talk to...")
 
Line 3: Line 3:
 
150w laser belonging to SwissKoo is in the Atelier, do not use until received formation from SwissKoo or lab manager.
 
150w laser belonging to SwissKoo is in the Atelier, do not use until received formation from SwissKoo or lab manager.
  
 +
See [[File:Laser_suva_f.pdf]] for laser safety information
 
=== Plastics ===
 
=== Plastics ===
 
No PVC, plexiglass is a good default (available in Obi). ABS and PLA should be fine.
 
No PVC, plexiglass is a good default (available in Obi). ABS and PLA should be fine.

Revision as of 01:31, 6 February 2015

The atelier is still being set up. The general concept is that we can't use machines without colonelmoutarde's supervision. If you want to bring new machines, you have to talk to the responsible people (otherwise there is too much stuff and we don't know where it's from). The fixme electronics corner can be used as much as you want - however we aren't supposed to touch other machines.

Laser

150w laser belonging to SwissKoo is in the Atelier, do not use until received formation from SwissKoo or lab manager.

See File:Laser suva f.pdf for laser safety information

Plastics

No PVC, plexiglass is a good default (available in Obi). ABS and PLA should be fine.

Wood

Wood max 10mm, use mdf (cheapest in Obi). Can do up 20mm on multiple passes.

CNC

SwissKoo CNC

Plasma

Not operational right now. Max 15/30mm thickness.

No water cooling, no earth, no ventilation. Can do some cuts but only as an exception.

Kiln/pottery thing

Not operational (?). Given up to the end of february to get fixed or will be removed from the space - see colonelmoutarde