Multicopter

From Fixme.ch
Revision as of 10:41, 17 March 2017 by Rorist (Talk | contribs) (Guides)

Jump to: navigation, search

Information

  • In the hobby, you don't say "drone", you'd rather say: multicopter, multirotor, quadcopter, hexacopter, fixed wing, etc etc

Multicopter at FIXME

Activities

Team

FMD.png FFT.svg Fft-nemen.jpg Fft2.svg

People&Multicopter

  • Rorist:
    • Vortex 285
    • QAV 210
    • TinyWhoop Carbon Fiber / Aluminum frame, NewBeeDrone FC and Gold Motors
    • microquads (cx10, hubsan x4), more to come!
    • Videos
  • Francois, Bebop, Vortex 285
  • Freestorm: DJI F550, Hubsan X4
  • Nemen: Vortex 285, Hubsan X4
  • Kat: RotorX Atom, Nighthawk250, Hubsan X4, NanoQX
  • Philou: Frame -> QAV 210 Lisam => Quad construit lors d'un workshop proposé par le Fablab la coté [1] avec construction de lunette FPV [2]

Tracks

  • Some design ideas for tracks
  • we currently have 3 working gates
  • Track 1

Track1.svg

Safety

Legislation

Radio

Hb9 frequences.png
Hb3 frequences.png

Frequency bands

Band No License HB3 License HB9 License Notes
431 - 433 MHz Forbidden 50 W 1000 W
433 - 435 MHz Forbidden 50 W 1000 W
435 - 437 MHz Forbidden 50 W 1000 W
2300 - 2450 MHz 100 W
2400 - 2483.5 MHz 100 mW ISM Band
5470 - 5725 MHz 500 mW (1 W with TPC)

Source: http://www.bakom.admin.ch/themen/frequenzen/00652/00753/index.html?lang=en#HF2400M Source: Prescriptions concernant les radioamateurs

Hardware

  • EzUHF:
    • Options for 431-433MHz, 433-435MHz, 435-437MHz.

Spots and Maps

Groups in Switzerland

Races

FPV Teams

Association/GAM

Commercial/Divers

Guides

Battery

Chargeur / Charger
  • TURNIGY P405 : simple d'utilisation
1/ Alimenter le chargeur / Power On the charger
2/ Sélectionner le type de batterie le touche Type (> 3s pour changer de selection) / Select the battery Type in pressing on the Type Key
3/ Changer le courant avec les touches display et start -> recommander: choisir la valeur batterie / Change the current 
4/ Presser sur Start et attendre / Press on Start Key and wait

Flying Controller

Parallel charging
  • Don't charge batteries that have a lot of difference in tension (>15V) as too much current will from from one to an other more than the battery can hold (usually 2-3C)
  • Don't charge batteries with different cell count (4 cells with 4 cells)
  1. Check all batteries with a LiPo checkers
  2. Order them by tension, group them accordingly
  3. Before chargin, plug all the batteries on the parallel board WITHOUT the balance plug. When the batteries equalize, some important current can flow throught them, the balance plug may burn if the board is not current limited
  4. Start charging and look at the cells tension to see they are all pretty much the same (~1-2V)
  5. Monitor the whole process, never charge unattended
  • Regularly check batteries temperature, in case of any sign of heat, turn off the charger immediatly
  • In case of smoke, remove the charger from power immediatly
  • Don't srpay water, you can use dirt or sand to limit propagation of fire

PIDs

Racing

Failsafe with d4r-ii

  • It's very very important to set the failsafe of the d4r-ii correctly
  • By default it'll retain the last value of all channels, thus contuying on its course and prevent the fc to enter failsafe
  • Procedure:
    • Bind the receiver (bind mode on tx, turn on rx with the button pressed, turn off everything)
    • turn on the rx only, press the button once

Radiocommande / Remote Control

PDF

esc

Calculators

Simulator

Shops

Switzerland

International