* http://www.proxmark.org/proxmark
* http://code.google.com/p/proxmark3/wiki/Compiling
== Proxmark 3 client ==
* Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp
wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl
chmod devkit.pl
./devkit.pl
export DEVKITPRO=~/devkitPro
export DEVKITARM=${DEVKITPRO}/devkitARM
export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only
cd proxmark3-read-only
make
* Plug the Proxmark
./client/proxmark3
* Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare
== Flash the Proxmark using a BusPirate ==
./configure --enable-buspirate --enable-maintainer-mode --disable-werror --disable-shared
make && sudo make install
* Build the proxmark roms (bootrom and fullimage), see belowabove
* Wire the BusPirate to the Proxmark3
** Pin 20 is GND and the the closest to the center of the board
> flash write_image /full/path/to/bootrom/obj/bootrom.elf
* Wait and enjoy the P3
[[Image:p3-bp.png]]
* References
** http://umeahackerspace.se/2013/03/21/bus-pirate-saves-the-day-proxmark3-jtag-flashing/
** http://michaldemin.wordpress.com/2010/02/27/how-to-buspirate-and-openocd/
== Proxmark 3 client ==
* Build the client/bootloader:
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config
cd /tmp
wget http://sourceforge.net/p/devkitpro/perlupdaters/ci/master/tree/devkitARMupdate.pl?format=raw -o devkit.pl
chmod devkit.pl
./devkit.pl
export DEVKITPRO=~/devkitPro
export DEVKITARM=${DEVKITPRO}/devkitARM
export PATH=$DEVKITARM/bin/:${PATH}
svn co http://proxmark3.googlecode.com/svn/trunk proxmark3-read-only
cd proxmark3-read-only
make
* Plug the Proxmark
./client/proxmark3
* Use it as Mifare emulator, https://code.google.com/p/proxmark3/wiki/Mifare
== See Also ==
* [[Bus_pirate]]