Raspberry Pi fasteners

From Fixme.ch
Revision as of 21:50, 5 August 2016 by Leo 037 (Talk | contribs) (tubular spacers 5 x 1 x 12 mm)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

solving the fastening of a 3-level stacking: Raspberry Pi 3 model B+ in the middle, 7-inch screen below and StromPi v2 UPS above.

thread is M2,5. initially:

  • screen is attached to RPI with "spacer screws" (12 mm + male threaded end 3 mm)
  • UPS is attached to RPI with screw (12 mm) with tubular spacers (7 mm).

in this case, we are looking for:

  • long screws and tubular spacers.
    • screw length 15 + 12 = 27 mm ideally, we take 30 mm (standard, threads on the screen can absorb an additional 3 mm)
    • additional set of tubular spacers: length 12 mm, plastic (?) tubing 5 x 1 mm
  • or "spacer screws" (ideally 7 mm) with long (4 mm instead of 3 mm) male threaded ends

long screws and tubular spacers

M2,5 x 30 mm screws

tubular spacers 5 x 1 x 12 mm

spacer screws M2,5 x 12 mm

  • TME 8 EUR/100 pces ou 1 EUR/10 pces
  • distrelec 77 CHF/50 pces ou 7 CHF/4 pces
  • conrad rien