Difference between revisions of "Gyrophare"
From Fixme.ch
Binary Brain (Talk | contribs) |
Binary Brain (Talk | contribs) |
||
| Line 29: | Line 29: | ||
= Software = | = Software = | ||
| − | The code is here: | + | The code is here: https://git.fixme.ch/BinaryBrain/Gyrophare |
= Authors = | = Authors = | ||
[[User:Binary_Brain]] | [[User:Binary_Brain]] | ||
Revision as of 15:25, 4 April 2017
The "Gyrophare" (warning light, in french) is an IoT device located in the middle of the hackerspace (at least when this page was written).
Contents
[hide]Control
You can control the Gyrophare via HTTP by calling a GET on /on and on /off.
It's current IP address is static (hardcoded in the WeMos) and is 62.220.135.210.
For example:
curl http://62.220.135.210/on curl http://62.220.135.210/off
Note that both request (also GET http://62.220.135.210/) are answered with a OK.
 Warning: | Sending to much request will make it freeze and stop reponding, making it impossible to turn off. Do not do it. |
Hardware
The hardware is the following:
- WeMos D1 Mini
- Relay Shield for WeMos D1 Mini
- A red warning light (230V)
| Warning: | Be careful: there is high voltage (230V) in this hack. It's pretty well isolated, except for the relay screws, but unplug the system if you want to look at it. |
Software
The code is here: https://git.fixme.ch/BinaryBrain/Gyrophare
