Gyrophare
From Fixme.ch
The "Gyrophare" (warning light, in french) is an IoT device located in the middle of the hackerspace (at least when this page was written).
Contents
[hide]Control
You can control the Gyrophare via HTTP by calling a GET
on /on and on /off.
Its current IP address is static (hardcoded in the WeMos) and is 62.220.135.210
.
Its URL is: gyro.fixme.ch
.
For example:
curl http://gyro.fixme.ch/on curl http://gyro.fixme.ch/off curl http://62.220.135.210/on curl http://62.220.135.210/off
Note that both request (also GET http://62.220.135.210/
) are answered with a OK
.
Warning: | Sending to much request will make it freeze and stop responding, making it impossible to turn off. Do not do it. |
Hardware
The hardware is the following:
- WeMos D1 Mini
- Relay Shield for WeMos D1 Mini
- A red warning light (230V)
Warning: | Be careful: there is high voltage (230V) in this hack. It's pretty well isolated, except for the relay screws, but unplug the system if you want to look at it. |
Software
The code is here: https://git.fixme.ch/BinaryBrain/Gyrophare