Difference between revisions of "Raspberry Pi fasteners"

From Fixme.ch
Jump to: navigation, search
(spacer screws)
(tubular spacers)
Line 22: Line 22:
 
== tubular spacers ==
 
== tubular spacers ==
  
* [http://www.tme.eu/ch/details/fix-3-12/distanzhulsen-aus-kunststoff/fixfasten/ TME]
+
* [http://www.tme.eu/ch/details/fix-3-12/distanzhulsen-aus-kunststoff/fixfasten/ TME] 6 EUR/100 pces
* [http://www.distrelec.ch/de/distanzhuelsen-12-mm-mm-ccb-composants-621234060002/p/14843096?q=*&filter_Category3=Distanzbolzen+und+Distanzhalter&filter_Category5=Distanzh%C3%BClsen+rund%2C+Kunststoff&filter_A%7E%7Emm=6&filter_Category4=Montage-+und+Distanzteile&filter_L%7E%7Emm=12&filter_Buyable=1&page=1&origPageSize=50&simi=97.32 distrelec, un peu trop large mais OK]
+
* [http://www.distrelec.ch/de/distanzhuelsen-12-mm-mm-ccb-composants-621234060002/p/14843096?q=*&filter_Category3=Distanzbolzen+und+Distanzhalter&filter_Category5=Distanzh%C3%BClsen+rund%2C+Kunststoff&filter_A%7E%7Emm=6&filter_Category4=Montage-+und+Distanzteile&filter_L%7E%7Emm=12&filter_Buyable=1&page=1&origPageSize=50&simi=97.32 distrelec, un peu trop large mais OK] 8.50 CHF/50 pces
 
* conrad rien
 
* conrad rien
  

Revision as of 22:54, 5 August 2016

solving the fastening of a 3-level stacking: Raspberry Pi 3 model B+ in the middle, 7-inch screen below and StromPi v2 UPS above.

thread is M2,5. initially:

  • screen is attached to RPI with "spacer screws" (12 mm + male threaded end 3 mm)
  • UPS is attached to RPI with screw (12 mm) with tubular spacers (7 mm).

in this case, we are looking for:

  • long screws and tubular spacers.
    • screw length 15 + 12 = 27 mm ideally, we take 30 mm (standard, threads on the screen can absorb an additional 3 mm)
    • additional set of tubular spacers: length 12 mm, plastic (?) tubing 5 x 1 mm
  • or "spacer screws" (ideally 7 mm) with long (4 mm instead of 3 mm) male threaded ends

M2,5 x 30 mm screws and tubular spacers

M2,5 x 30 mm screws

tubular spacers

spacer screws