Raspberry Pi fasteners
From Fixme.ch
Revision as of 20:24, 5 August 2016 by Leo 037 (Talk | contribs) (Created page with "solving the fastening of a 3-level stacking: Raspberry Pi 3 model B+ in the middle, 7-inch screen below and StromPi v2 UPS above. thread is M2,5. initially: * screen is atta...")
solving the fastening of a 3-level stacking: Raspberry Pi 3 model B+ in the middle, 7-inch screen below and StromPi v2 UPS above.
thread is M2,5. initially:
- screen is attached to RPI with "spacer screws" (12 mm + male threaded end 3 mm)
- UPS is attached to RPI with screw (12 mm) with tubular spacers (7 mm).
in this case, we are looking for:
- long screws and tubular spacers: screw length 15 + 12 = 27 mm ideally, we take 30 mm (standard, threads on the screen can absorb an additional 3 mm)
- or "spacer screws" (ideally 7 mm) with long (4 mm instead of 3 mm) male threaded ends
