2,512 bytes added,
09:25, 13 November 2023 [[Category:Ongoing_Projects]]
== Description ==
DIY stage LED for the lightshow of the [https://fixme.ch/node/224 concert of the FIXME metal band], the Tendinites!
== Goal ==
* Cool light effects
* Synced precisely to the music (not auto generated)
== Hardware ==
* Tube: 2x 1 meters d:12mm aluminum with a PVC 10cm tube to join two tubes together
* Tube foot: table leg with 3d printed inserts for the 12mm tube
* Tube holder: 6x 3D printed. A velcro is taped between the tube holder and the led profile for easy removal.
* Led profile: 6x 0.5m angle diffuser
* Led: 2x 1.5m 12v WS2814WW (individually addressed (by group of 3) 60led/ strip RGBW (warm white 3000k))
* PowerSupply: 100w 12v Meanwell
* Controller: Athom music esp32
* All of this x4 as I built 4 fixtures
== Software ==
Wled 0.14 installed on the 4 esp32 and around 30 presets created using the built-in effects. Using Art-net as an interface with a different universe for each of the units and set the channel to brightness + effect. On the computer, QLC+ 4.12 installed. I created a new Fixture using the editor with 2 channels (dimmer, effect), then created the same number of scenes as presets. Then I created virtual buttons calling each scene, linked with a MIDI trigger. In Ableton live, I created a set made out of all the songs in midi format. I created a new track that was firing MIDI notes using a midi loopback software to trigger QLC+. Finally, I used the markers in ableton with a novation midi keyboard to quickly navigate to the beginning of a song and trigger a stop at the end of it. The sound engineer manually triggered the button at the beginning of each song.
== V2 ideas ==
Questions:
* Is it ok to have 230v go to each light or is it better to have a large distribution box to convert to 12v and then use large 16AWG cable to distribute? Probably much heavier…
* LED: use RGB ultra bright (if only for lightshows?) What Digital 5v/12v/24v RGB(W) LED Strip to buy - quinled.info
* Controller: Use custom esp32 with ethernet ? Use PCB with Fuse + switch + level control + 5v
* Holder:
** use 1m angle diffuser? (less holder, tube 1.5m,...)
** Get rid of tube? -> how to hold the diffuser together?
** Replace the diffuser with own alu and own diffuser
* Base:
Foldable feet
Think about setting the stage with power and ethernet, and quick install of fixture (as in inspiration video)
Software:
Use geopixel, madmapper, or other DJ software for more control instead of QLC+
== Participants ==
* [[User:okueng]]