Changes
CB
,Created page with "We got a Stabo xm2000[http://www.radiomuseum.org/r/stabo_stratofon_xm_2000.html] Citizen Band radio, without power chord. Possibly broken. =Specs= Power rating: 13.2VDC nominal..."
We got a Stabo xm2000[http://www.radiomuseum.org/r/stabo_stratofon_xm_2000.html] Citizen Band radio, without power chord. Possibly broken.
=Specs=
Power rating: 13.2VDC nominal, must not exceed 15VDC
Antenna impedance: 50 Ohm. DO NOT TX WITHOUT AN ANTENNA CONNECTED.
Ext. loudspeaker impedance: 4Ohm.
=Power connector=
Connector similar to C8[http://en.wikipedia.org/wiki/IEC_60320#C7.2FC8_coupler] but smaller: 2 pin. pin spacing: almost 4mm, width: 13mm height: 6mm with one notch on top
According to:
[http://www.servicedocs.com/ARTIKELEN/7200251590001.PDF] (Not same model -xm3003e- yet looks similar)
In the original power cord, there is a 2A fuse...
800mA max while transmitting.
=Todo=
* Fit 2A fuse and usable screw//b/ connecting block to power connector
* See if it turns on / troubleshoot
* If so, hook/make an antenna
* Chat with truck drivers
=Interested persons=
Arnaud
=Specs=
Power rating: 13.2VDC nominal, must not exceed 15VDC
Antenna impedance: 50 Ohm. DO NOT TX WITHOUT AN ANTENNA CONNECTED.
Ext. loudspeaker impedance: 4Ohm.
=Power connector=
Connector similar to C8[http://en.wikipedia.org/wiki/IEC_60320#C7.2FC8_coupler] but smaller: 2 pin. pin spacing: almost 4mm, width: 13mm height: 6mm with one notch on top
According to:
[http://www.servicedocs.com/ARTIKELEN/7200251590001.PDF] (Not same model -xm3003e- yet looks similar)
In the original power cord, there is a 2A fuse...
800mA max while transmitting.
=Todo=
* Fit 2A fuse and usable screw//b/ connecting block to power connector
* See if it turns on / troubleshoot
* If so, hook/make an antenna
* Chat with truck drivers
=Interested persons=
Arnaud
