Nfs

From Fixme.ch
Jump to: navigation, search

Remark

To start things up, I sincerely think that NAT is a bad things on a philosophical level. If you however want the nfs to support it, you're welcome to add it. So don't connect to the fixme nat in the first place.

How to

First start the rpcbind daemon and the nfs-common daemon on debian or similar (ubuntu for example)

sudo init.d start rpcbind nfs-common

OR on arch

sudo rc.d start rpcbind nfs-common

(Note: if you don't have rpcbind, just use portmap instead. Then simply mount that little boy

sudo mount nfs.fixme.ch:/media/disk1/music /mnt

Yes, that's all little slacker :).

Shares

  • /media/disk1/share : Used by the Ftp server, accessible within the hackerspace Network by everyone.
  • /media/disk1/music : Used by MPD Daemon, accessible within the hackerspace Network.
  • /media/disk1/tftp : Used by the tftp server for pxe.

configuration

the export file is :

/media/disk1/tftp                              62.220.135.192/26(ro,sync,no_subtree_check)
/media/disk1/tftp                              [2001:788:dead::/48](ro,sync,no_subtree_check)

/media/disk1/music                             62.220.135.192/26(ro,subtree_check,sync)
/media/disk1/music                             [2001:788:dead::/48](ro,subtree_check,sync)                                                                          

/media/disk1/stl                               62.220.135.192/26(rw,subtree_check,sync)
/media/disk1/stl                               [2001:788:dead::/48](rw,subtree_check,sync)
  • Activate debug
rpcdebug -m nfs -s proc
  • Deactivate debug
rpcdebug -m nfsd -c