Changes
[[Category:Ongoing_Projects]]
The "Gyrophare" (''warning light'', in french) is an IoT device located in the middle of the hackerspace (at least when this page was written).
You can control the Gyrophare via HTTP by calling a <code>GET</code> on '''/on''' and on '''/off'''.
For example:
curl http://gyro.fixme.ch/on
curl http://gyro.fixme.ch/off
curl http://62.220.135.210/on
curl http://62.220.135.210/off
Note that both request (also <code>GET http://62.220.135.210/</code>) are answered with a <code>OK</code>.
{{warning|Sending to much request will make it freeze and stop responding, making it impossible to turn off. Do not do it.}}
= Hardware =
* Relay Shield for WeMos D1 Mini
* A red warning light (230V)
{{warning|Be careful: there is high voltage (230V) in this hack. It's pretty well isolated, except for the relay screws, but unplug the system if you want to look at it.}}
= Software =
The code is here: https://git.fixme.ch/BinaryBrain/Gyrophare
= Authors =
[[User:Binary_Brain]]
