Changes
/* Calibration */
* Z end stop is glued, it was moving, Z axis should stay calibrated longer
* There is a mechanical problem on the axis, to be calibrated the bed is not leveled compared to the ground, it's working though
== Testing ==
Interesting stuff to print for testing the quality and calibration
* http://www.3dbenchy.com/
* 5mm steps https://www.thingiverse.com/thing:24238
* Single wall (0.4mm) https://www.thingiverse.com/thing:271086
== See Also ==
* [[Ultimaker]]
* [[Plastic_recycling]]
