Changes
Created page with "== Makefile == * Install this: apt-get install arduino-mk avr-gcc avr-libc * Use the arduino from the command line, to compile and upload ARDUINO_DIR = /usr/share/arduino BOARD_..."
== Makefile ==
* Install this:
apt-get install arduino-mk avr-gcc avr-libc
* Use the arduino from the command line, to compile and upload
ARDUINO_DIR = /usr/share/arduino
BOARD_TAG = atmega328
ARDUINO_PORT = /dev/ttyUSB*
ARDUINO_LIBS = NewPing OtherLibs
include /usr/share/arduino/Arduino.mk
* Choose the BOARD_TAG using this command:
ard-parse-boards --boards
* Commands
make - no upload
make upload - compile and upload
make clean - remove all our dependencies
make depends - update dependencies
make reset - reset the Arduino by tickling DTR on the serial port
make raw_upload - upload without first resetting
make show_boards - list all the boards defined in boards.txt
* Install this:
apt-get install arduino-mk avr-gcc avr-libc
* Use the arduino from the command line, to compile and upload
ARDUINO_DIR = /usr/share/arduino
BOARD_TAG = atmega328
ARDUINO_PORT = /dev/ttyUSB*
ARDUINO_LIBS = NewPing OtherLibs
include /usr/share/arduino/Arduino.mk
* Choose the BOARD_TAG using this command:
ard-parse-boards --boards
* Commands
make - no upload
make upload - compile and upload
make clean - remove all our dependencies
make depends - update dependencies
make reset - reset the Arduino by tickling DTR on the serial port
make raw_upload - upload without first resetting
make show_boards - list all the boards defined in boards.txt
